CQM1-CIF01 Omron, CQM1-CIF01 Datasheet - Page 85

• Manufacturer Part Number: CQM1-CIF01
• Description: PERIPHERAL CABLE FOR NEC COMP.
• Manufacturer: Omron

Specifications of CQM1-CIF01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

64
4-6
4-6-1
4-6-2
To Clear to Default
Settings
To Copy Axes
Editing Acceleration/Deceleration Time Settings
Editing Acceleration/Deceleration Time Settings
Acceleration/Deceleration Time Setting Window
Editing Acceleration/Deceleration Time Settings
1,2,3...
1,2,3...
On the project tree, either double-click Edit Accel/Decel, or select it and press
the Enter Key.
Example: The following will be displayed as the 4-axis Position Control Unit
Acceleration/Deceleration Time Setting Editing Window.
The acceleration/deceleration time setting range is from 00000000 to
0003D090 Hex (0 to 250,000) (ms). After the settings have been entered and
the Enter Key pressed, the cursor will move to the next setting.
Example: The following will be displayed as the Acceleration/Deceleration
Time Setting Editing Window.
Use the following procedure to clear specific settings to their default values.
(Refer to 4-2-4 Clearing Settings for details.)
1. In the Acceleration/Deceleration Setting Editing Window, select the set-
2. Select Edit - Clear.
For 2-axis and 4-axis Position Control Units, data can be copied from one axis
to another axis by selecting the source and destination axes. (Refer to 4-2-5
Copying Axis Settings for details.)
1. Select Edit - Copy Axis.
2. Under From and To, select the axes to be copied from and to respectively.
3. Click the OK Button.
tings to be cleared to their default values, or designate the range by clicking
and dragging.
Section 4-6