11730D AGILENT TECHNOLOGIES, 11730D Datasheet - Page 45

• Manufacturer Part Number: 11730D
• Description: SENSOR CABLE, 50FT
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 11730D

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Cable Length: 50ft
• Features: Reduces RFI Effect On Low Power Readings With Improved Shielding Design
• Cable Assembly Type: Sensor
• Cable Color: Gray
• Rohs Compliant: No
• For Use With: 8480 & E-Series Power Sensors
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

34
5
Attenuators
Attenuators
Fixed Attenuators
Agilent 8491A/B
Agilent 8493A
Agilent 8498A
Agilent 8490D
Agilent 8491A/B, 8493A/B/C
Agilent Technologies coaxial fixed attenuators provide precise
attenuation, flat frequency response, and low SWR over broad
frequency ranges. Attenuators are available in nominal
attenuations of 3 dB and 6 dB, as well as 10 dB increments from
10 dB to 60 dB. These attenuators are swept-frequency tested to
ensure specification compliance at all frequencies. Calibration
points are provided on a nameplate chart attached to each unit.
Agilent 8498A high-power attenuator
The Agilent 8498A is designed to meet the needs of high-power
attenuation applications in the RF and microwave frequency
range. It is a 25 watt average, 30 dB fixed attenuator with a
frequency range of DC to 18 GHz. The maximum peak power
specification is 500 watts (DC to 5.8 GHz) and 125 watts (5.8
to 18 GHz). Available only in a 30 dB version, the unit offers a
1.3 SWR and ±1 dB accuracy at 18 GHz. Large heat-dissipating
fins keep the unit cool even under continuous maximum input
power conditions.
Agilent 8490D 50 GHz fixed attenuator
Agilent Technologies coaxial fixed attenuators have been the
standard for accurate flat response and low SWR. The Agilent
8490D offers exceptional performance to 50 GHz using the
2.4 mm connector. Attenuation values available are 3, 6, 10, 20,
30, and 40 dB. Ideally suited for extending the range of sensitive
power meters or for use as calibration standards, these broadband
attenuators are manufactured with the same meticulous care as
their lower frequency counterparts.
Agilent 11581A, 11582A, 11583C
attenuator sets
Provides a set of four attenuators (3, 6, 10, and 20 dB) furnished
in a walnut accessory case. The Agilent 11581A set consists of
Agilent 8491A attenuators; the Agilent 11582A set, Agilent 8491B
attenuators; and the Agilent 11583C set, Agilent 8493C
attenuators. These sets are ideal for calibration labs or where
precise knowledge of attenuation and SWR is desired.
Agilent 86213A attenuator set
Provides a set of four 75 ohm type-N attenuators (3, 6, 10 and
20 dB) in a walnut accessory case (Agilent 0955-0765,
0955-0766, 0955-0767, and 0955-0768), respectively. Used for
reducing power and improving match. SWR is 1.12 to 1.3 GHz
and 1.3 to 3 GHz. Attenuation accuracy is ±0.5 dB.