11730D AGILENT TECHNOLOGIES, 11730D Datasheet - Page 207

• Manufacturer Part Number: 11730D
• Description: SENSOR CABLE, 50FT
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 11730D

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Cable Length: 50ft
• Features: Reduces RFI Effect On Low Power Readings With Improved Shielding Design
• Cable Assembly Type: Sensor
• Cable Color: Gray
• Rohs Compliant: No
• For Use With: 8480 & E-Series Power Sensors
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

196
20
Power Sensors
Power Sensors
Agilent N1921A/22A P-series wideband
power sensors
The Agilent P-series wideband power sensors are designed for use
with the P-series power meters for measuring CW, average and
peak signals with video bandwidth up to 30 MHz. The N192xA
sensors are the first to provide internal zero and calibration. This
feature eliminates the multiple connections associated with using
an external calibration source, thus minimizing connector wear,
test time and measurement uncertainty. The operating frequency
range covers from 50 MHz to 40 GHz with wide dynamic range of
–35 dBm to +20 dBm.
Agilent E9320 peak and average power sensors
E9320 peak and average power sensors cover the 50 MHz to
6/18 GHz frequency ranges and –65 to +20 dBm power range.
They are optimized for comprehensive measurements on pulsed
envelopes and signals with complex modulation. When teamed
with the Agilent EPM-P series power meters (E4416A/17A), they
can handle test signal envelopes with up to 5 MHz video
bandwidth. E9320 peak and average sensors/meters feature
a two-mode operation, ‘normal’ for most average and peak
measurements (with or without time gating), and ‘average only’
for average power measurements on low level or CW signals.
Agilent E9300 average power sensors
E-series 9300 wide dynamic range, average power sensors are
designed for use with the EPM family of power meters. It has high
dynamic range of 80 dB (–60 to +44 dBm) and wide frequency
range (9 kHz to 18 GHz), depending on sensor model. It is capable
of accurately measuring the average power of modulated signals
over wide dynamic range, regardless of signal bandwidth.
Agilent E441xA CW power sensors
E4412/13A power sensor permits measuring continuous wave
(CW) power over an extended dynamic range from –70 to
+20 dBm, up to a frequency range of 26.5 GHz. Their 90 dB range
makes them ideal for wide-dynamic range applications such as
high-attenuation component measurements. The calibration factor
is measured and stored in an EEPROM within each individual
sensor and downloaded into the meter automatically. Since the
correction factors are derived from a CW source, they do not
provide an accurate average power reading for modulated signal.
They are designed to work with EPM series power meters.
Agilent 8480 series power sensors
The 8480 series power sensors are designed for use with the
EPM series, EPM-P series power meters. These thermocouple and
diode power sensors measure average power for all signal types
regardless of signal bandwidth and provide extraordinary accuracy,
stability, and SWR over a wide range of frequencies (100 kHz to
110 GHz) and power levels (–70 dBm to +44 dBm).
Agilent N192xA series power sensors
Agilent E441xA, E9300, E9320 series power sensors
Agilent 8480 series power sensors