11730D AGILENT TECHNOLOGIES, 11730D Datasheet - Page 27

• Manufacturer Part Number: 11730D
• Description: SENSOR CABLE, 50FT
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 11730D

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Cable Length: 50ft
• Features: Reduces RFI Effect On Low Power Readings With Improved Shielding Design
• Cable Assembly Type: Sensor
• Cable Color: Gray
• Rohs Compliant: No
• For Use With: 8480 & E-Series Power Sensors
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

16
3
Adapters and Connectors
1.0 mm Connector Launch
Flexible microcircuit packaging
The Agilent 11923A 1.0 mm female
connector launch threads into a package or
fixture housing to transition a microwave
circuit from microstrip to coaxial connector.
The Agilent 11923A connector launch is
intended for use with the N5250A and
other test systems up to 110 GHz. The
Agilent 11923A 1.0 mm female connector
has an air dielectric interface and center
conductor that is supported by a low-loss
plastic bead on one end and a glass-to-
metal seal interface on the other end.
This interface consists of a 0.162 mm
diameter pin that extends inside the
package or fixture for connection onto a
microwave circuit.
The Agilent 11923A is pre-assembled and
supplied with a machining detail for
mounting the launch and assembly
instructions. The user is responsible for
making the connection onto the circuit
card, machining the package, and installing
the connector. If a quasi-hermetic seal is
desired, epoxy may be applied to threads
of the launch prior to installation. The
procedure describing the necessary
dimensions for the package and installation
is provided with the launch assembly.
1.0 mm (f) connector launch
Supplemental characteristics
Environmental specifications
Specifications
Specifications describe the instrument’s warranted performance over the temperature
range 0 to 55° C (except where noted). Supplemental characteristics are intended to
provide information for applying the instrument by giving typical but nonwarranted
performance parameters. These are noted as “typical”, “nominal”, or “approximate”.
Note: The operating temperature is a critical factor in the performance during measurements and between
calibrations. Storage or operation within an environment other than that specified above may cause damage
to the product and void the warranty.
Non-operating environmental specifications apply to storage and shipment. Products should be stored in a
clean, dry environment. Operating environmental specifications apply when the product is in use. Products should
not be operated in a condensing environment.
Key literature
Agilent 11923A Operating and Service Guide 11923-90001
Model number
11923A
Model number
11923A
Temperature
Altitude
Coax connector type
(f) to circuit card launch
Return loss
–16 dB
Operating
0° to 55°C
<15.000 meters (<50.000 feet)
Frequency (GHz)
DC to 110
Max CW power
better than: 6 W
Non-operating
–40° to 75° C
<15.000 meters (<50.000 feet)
Insertion loss
better than: –1.0 dB