CS5102A-BL Cirrus Logic Inc, CS5102A-BL Datasheet - Page 34

• Manufacturer Part Number: CS5102A-BL
• Description: A/D Converter (A-D) IC
• Manufacturer: Cirrus Logic Inc

Specifications of CS5102A-BL

• Input Channels Per Adc: 2
• Mounting Type: Surface Mount
• No. Of Channels: 2
• Power Rating: 44mW
• Supply Voltage Min: 4.5V
• Peak Reflow Compatible (260 C): No
• Sample Rate: 20kSPS
• Supply Voltage Max: 5.5V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Digital Outputs
STBY - Standby (Calibrating), PIN 5.
SDATA - Serial Output, PIN 15.
SSH/SDL - Simultaneous Sample/Hold / Serial Data Latch, PIN 11.
TRK1, TRK2 - Tracking Channel 1, Tracking Channel 2, PINS 8 and 9.
Analog Outputs
REFBUF - Reference Buffer Output, PIN 21.
Miscellaneous
TEST - Test, PIN 26.
34
Indicates calibration status after reset. Remains low throughout the calibration sequence and
returns high upon completion.
Presents each output data bit on a falling edge of SCLK. Data is valid to be latched on the
rising edge of SCLK.
Used to control an external sample/hold amplifier to achieve simultaneous sampling between
channels. In FRN and SSC modes (SCLK is an output), this signal provides a convenient latch
signal which forms the 16 data bits. This can be used to control external serial to parallel
latches, or to control the serial port in a DSP.
Falls low at the end of a conversion cycle, indicating the acquisition phase for the
corresponding channel. The TRK1 or TRK2 pin will return high at the beginning of conversion
for that channel.
Reference buffer output. A 0.1 F ceramic capacitor must be tied between this pin and VA-.
Allows access to the CS5101A’s and the CS5102A’s test functions which are reserved for
factory use. Must be tied to VD+.
CS5101A CS5102A
DS45F2