CB-ACC-53 ConnectBlue, CB-ACC-53 Datasheet - Page 11

• Manufacturer Part Number: CB-ACC-53
• Description: ANTENNA DUAL-BAND RPSMA
• Manufacturer: ConnectBlue

Specifications of CB-ACC-53

• Antenna Type: Whip: 1/2 Wave, Swivel, Tilt (Right Angle)
• Number Of Bands: 2
• Frequency: 2.4GHz, 5GHz
• Gain: 3dBi
• Termination: RP-SMA
• Mounting Type: Connector
• Height (max): 4.21" (107mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 809-1035

2.2 Pin Description
2.2.1 J2 Connector
Table 2: Signals on J2.
J2
Pin Nr
1-2
3-4
5-10
11
12
Pin Name
VSS
VCC_3V3
RED/Mode
Switch-0
Signal Name
Ground
Power
Reserved
Red LED output
Function switch
Version 1.16 - 2009-12
CMOS
Signal
Level
Ground
3.3V
CMOS
Type
In/Out
In
Description
GND
3.0 – 6.0 VDC for
CB-OEMSPA311 modules
3.3 – 6.0 VDC for
CB-OEMSPA331 modules
Reserved, do not connect.
RED:
Logic Red LED Signal
(see Chapter 3, Table 14). Active
low.
Mode:
Not used on cB-0901.
This pin is also used to select Logic
level mode (instead of RS232) for
connectBlue product with internal
RS232 driver. To be compatible with
these products check the datasheet
for these products about this signal.
The pin is not allowed to be pull-
down when using the SerialSelect
signals.
Used for the “Connect on external
signal” function, see the Serial Port
Adapter AT command Specification
for more information on the Func-
tion switch. Active low.
See section A.2.3.4 for design ex-
amples.
11