BMR4500002/020 Ericsson Power Modules, BMR4500002/020 Datasheet - Page 30

• Manufacturer Part Number: BMR4500002/020
• Description: DC/DC Converters & Regulators 66W 4.5-14V OUT 20A 25.65x12.9x8.22 mm
• Manufacturer: Ericsson Power Modules
• Series: BMR 450r

Specifications of BMR4500002/020

• Output Power: 110 W
• Input Voltage Range: 4.5 V to 14 V
• Number Of Outputs: 1
• Output Voltage (channel 1): 0.6 V to 5.5 V
• Output Current (channel 1): 20 A
• Package / Case Size: 25.65 mm x 12.9 mm x 8.2 mm
• Output Voltage: 0.6 V to 5.5 V
• Product: Non-Isolated / POL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

E
Soldering Information - Hole Mounting
The hole mounted product is intended for plated through hole
mounting by wave or manual soldering. The pin temperature is
specified to maximum to 270°C for maximum 10 seconds.
A maximum preheat rate of 4°C/s and maximum preheat
temperature of 150°C is suggested. When soldering by hand,
care should be taken to avoid direct contact between the hot
soldering iron tip and the pins for more than a few seconds in
order to prevent overheating.
A no-clean flux is recommended to avoid entrapment of
cleaning fluids in cavities inside the product or between the
product and the host board. The cleaning residues may affect
long time reliability and isolation voltage.
Delivery Package Information
The products are delivered in antistatic injection molded trays
(Jedec design guide 4.10D standard).
Prepared (also subject responsible if other)
EPETSCH
Approved
EAB/FJB/GKF [G.Eriksson]
BMR 450 Digital PoL Regulators
Input 4.5-14 V, Output up to 20 A / 100 W
Tray Specifications
Material
Surface resistance
Bakability
Tray thickness
Box capacity
Tray weight
Antistatic PPE
10
The trays can be baked at maximum
125°C for 48 hours
14.50 mm 0.571 [inch]
300 products (5 full trays/box)
160 g empty, 490 g full tray
5
< Ohm/square < 10
12
Checked
See §1
Ericsson Internal
PRODUCT SPEC.
No.
5/1301-BMR450 Uen
Date
2008-09-16
JEDEC standard tray for 6x10 = 60 products.
All dimensions in mm [inch]
Tolerances: X.x ±0.26 [0.01], X.xx ±0.13 [0.005]
Note: pick up positions refer to center of pocket.
See mechanical drawing for exact location on product.
Technical Specification
EN/LZT 146 400 R3A March 2010
© Ericsson AB
Rev
B
Reference
2 (4)
30