WM8985GEFL Wolfson Microelectronics, WM8985GEFL Datasheet - Page 77

• Manufacturer Part Number: WM8985GEFL
• Description: Audio CODECs Multimedia CODEC with Class D HP
• Manufacturer: Wolfson Microelectronics

Specifications of WM8985GEFL

• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: QFN-32
• Minimum Operating Temperature: - 25 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Production Data
w
Figure 32 Right Justified Audio Interface (assuming n-bit word length)
In I
other bits up to the LSB are then transmitted in order. Depending on word length, BCLK frequency
and sample rate, there may be unused BCLK cycles between the LSB of one sample and the MSB of
the next.
Figure 33 I
In DSP/PCM mode, the left channel MSB is available on either the 1
rising edge of BCLK (selectable by LRP) following a rising edge of LRC. Right channel data
immediately follows left channel data. Depending on word length, BCLK frequency and sample rate,
there may be unused BCLK cycles between the LSB of the right channel data and the next sample.
In device master mode, the LRC output will resemble the LRC pulse shown in Figure 34 and Figure
35. In device slave mode, Figure 36 and Figure 37, it is possible to use any length of LRC pulse less
than 1/fs, providing the falling edge of the LRC pulse occurs greater than one BCLK period before the
rising edge of the next LRC pulse.
Figure 34 DSP/PCM Mode Audio Interface (mode A, LRP=0, Master)
2
S mode, the MSB is available on the second rising edge of BCLK following a LRC transition. The
2
S Audio Interface (assuming n-bit word length)
st
(mode B) or 2
PD, Rev 4.6, July 2009
WM8985
nd
(mode A)
77