M1AFS-EMBEDDED-KIT Actel, M1AFS-EMBEDDED-KIT Datasheet - Page 41

• Manufacturer Part Number: M1AFS-EMBEDDED-KIT
• Description: MCU, MPU & DSP Development Tools CortexM1-enabled Fusion Embedded Kit
• Manufacturer: Actel

Specifications of M1AFS-EMBEDDED-KIT

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8 – AC Parameters
This section gives the AC timing parameters of the Cortex-M1 black box across all M1-enabled devices.
These numbers describe the timing at the ports of the black box; that is, the logic contained within the
CDB file. The AC parameters are valid for v3.1 of Cortex-M1, operating under worst-case commercial
conditions. In the following tables. all times are in nanoseconds.
Note:
The parameter definitions are as follows:
The AC parameters are shown in
•
•
•
•
PERIOD is the minimum supported period of the clock signal specified.
SETUP is the minimum time for which the specified input signal must be valid before the rising
edge of the specified clock.
HOLD is the minimum time for which the specified input signal must remain valid after the rising
edge of the specified clock.
CLOCK2OUT is the maximum propagation delay from the rising edge of the specified clock to the
specified output signal to be guaranteed valid.
All AC parameters are measured at commercial range operating conditions.
Table 8-1 on page 42
R ev i si o n 1 2
through
Table 8-6 on page
47.
41