LPC1766-STK Olimex Ltd., LPC1766-STK Datasheet - Page 18

• Manufacturer Part Number: LPC1766-STK
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR LPC1766 256KB FLASH 64KB RAM
• Manufacturer: Olimex Ltd.

Specifications of LPC1766-STK

• Processor To Be Evaluated: LPC1766
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB, CAN, I2C, SPI, UART
• Dimensions: 134.6 mm x 101.6 mm
• Operating Supply Voltage: 3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

USB_HOST
controller enables full- and low-speed data exchange with USB devices attached to the bus. It consists
of a register interface, a serial interface engine, and a DMA controller. The register interface complies
with the OHCI specification.
USB_DEVICE
of a register interface, serial interface engine, endpoint buffer memory, and a DMA controller. The
serial interface engine decodes the USB data stream and writes data to the appropriate endpoint
buffer. The status of a completed USB transfer or error condition is indicated via status registers. An
interrupt is also generated if enabled. When enabled, the DMA controller transfers data between the
endpoint buffer and the on-chip SRAM.
USB 2.0 full-speed Host controller with dedicated DMA controller and on-chip PHY. The host
The device controller enables 12 Mbit/s data exchange with a USB Host controller. It consists
1
2
3
4
1
2
3
4
Pin #
Pin #
HOST_PWR
USB_HOST_D-
USB_HOST_D+
GND
+5V_USB_DEV
USB_DEV_D-
USB_DEV_D+
GND
Signal Name
Signal Name
Page 18