LPC1766-STK Olimex Ltd., LPC1766-STK Datasheet - Page 10

• Manufacturer Part Number: LPC1766-STK
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR LPC1766 256KB FLASH 64KB RAM
• Manufacturer: Olimex Ltd.

Specifications of LPC1766-STK

• Processor To Be Evaluated: LPC1766
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB, CAN, I2C, SPI, UART
• Dimensions: 134.6 mm x 101.6 mm
• Operating Supply Voltage: 3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

RESET CIRCUIT:
CLOCK CIRCUIT:
JUMPER DESCRIPTION:
CAN_D
CAN_T
devices should be closed. If you have more than two devices, only the two end-devices should be
closed.
Default state is closed.
3.3V(VREG)_E
Default state is closed.
3.3V_E
3.3VA_E
Default state is closed.
3.3V(I/O)_E
Default state is open.
MCU.
closed. This means that if you have only two devices with CAN, the jumpers of both
only – 42 and 84 pins of the MCU.
Default state is closed.
Default state is closed.
CAN Disable. If this jumper is closed, the CAN is disabled.
This jumper assures correct work of the CAN. At each end of the bus it should be
This jumper, when closed, supplies 3.3 V voltage for the on-chip voltage regulator
This jumper, when closed, enable the main 3.3 V regulator VR1(3.3V) - LM1117.
This jumper, when closed, supplies 3.3 V voltage to the VDDA and VREFP pins of the
This jumper, when closed, supplies 3.3 V voltage to the VDD – 4 pins of the MCU.
connector, pin 10 of TRACE connector and RESET button.
(XTAL2).
18 (RTCX2).
LPC1766-STK reset circuit includes jumper RST_E, pin 15 of JTAG
Quartz crystal 12 MHz is connected to LPC1766 pin 22 (XTAL1) and pin 23
Quartz crystal 32.768 kHz is connected to LPC1766 pin 16 (RTCX1) and pin
Page 10