S1D13743F00A200 Epson, S1D13743F00A200 Datasheet - Page 60

LCD Drivers LCD CNTRL w/Embedded 464KB SRAM

S1D13743F00A200

Manufacturer Part Number
S1D13743F00A200
Description
LCD Drivers LCD CNTRL w/Embedded 464KB SRAM
Manufacturer
Epson
Datasheet

Specifications of S1D13743F00A200

Maximum Clock Frequency
33 MHz, 68.59 MHz
Operating Supply Voltage
1.5 V
Maximum Operating Temperature
+ 85 C
Package / Case
QFP-20-144
Attached Touch Screen
No
Maximum Supply Current
74 mA
Minimum Operating Temperature
- 40 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
S1D13743F00A200
Manufacturer:
EPSON
Quantity:
5 690
Page 60
bits 1-0
bit 7
S1D13743
X70A-A-001-02
REG[36h] Special Effects Register
Default = 00h
Window Data
Type
7
REG[36h] Bit 7 REG[36h] Bit 6
0b
0b
1b
1b
Double Buffer
Enable
6
Note
Note
Window SwivelView Mode Select bits [1:0]
These bits select the SwivelView™ orientation that will be applied to the window. Each
window on the active display can have independent rotation, as the rotation is performed
prior to writing to the display buffer.
Window Data Type
This bit is used in conjunction with the Double Buffer Enable bit (REG[36h] bit 6) and
determines whether the data being input from the host will be double-buffered. This bit
must be set before the window data is written, as the window coordinates will be latched
internally to be used by the display pipe during display cycles.
When this bit = 0, the data being written from the Host is intended for single buffer only.
When this bit = 1, the data being written from the Host is intended for double buffer oper-
ation.
While double buffering is enabled, the window coordinates should not be modified.
If the Input Data Format is YUV 4:2:0 (REG[2Ah] bits 3-0 = 1001b), the Window Data
Type bit must not be changed while the YYC is busy (REG[58h] bit 4 = 1b).
0b
1b
0b
1b
REG[34h] bits 1-0
Table 10-11: Window Data Type / Buffer Selection
Table 10-10: SwivelView Mode Select Options
5
00b
01b
10b
11b
Single buffered window with no double buffering anywhere on the display.
Use this to write a single buffered window while preventing tearing in a
previously defined double buffered window.
Reserved
Use this to write data to be double buffered.
4
Revision 2.7
n/a
SwivelView Orientation
3
Use Case
0° (Normal)
180°
270°
90°
2
Epson Research and Development
Hardware Functional Specification
Window Pixel Sizing bits 1-0
1
Vancouver Design Center
Issue Date: 2010/05/18
Read/Write
0

Related parts for S1D13743F00A200