XR88C681CP/40-F Exar Corporation, XR88C681CP/40-F Datasheet - Page 84

• Manufacturer Part Number: XR88C681CP/40-F
• Description: IC UART CMOS DUAL 40PDIP
• Manufacturer: Exar Corporation
• Type: CMOS Dual Channel UARTr

Specifications of XR88C681CP/40-F

• Number Of Channels: 2, DUART
• Package / Case: 40-DIP (0.600", 15.24mm)
• Features: *
• Fifo's: 1 Byte, 3 Byte
• Voltage - Supply: 5V
• With Parallel Port: Yes
• With Cmos: Yes
• Mounting Type: Through Hole
• Data Rate: 1 Mbps
• Supply Voltage (max): 5.25 V
• Supply Voltage (min): 4.75 V
• Supply Current: 15 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: Through Hole
• Operating Supply Voltage: 5 V
• Propagation Delay Time Ns: 400 ns
• No. Of Channels: 2
• Supply Voltage Range: 4.75V To 5.25V
• Operating Temperature Range: 0°C To +70°C
• Digital Ic Case Style: DIP
• No. Of Pins: 40
• Filter Terminals: DIP
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 1016-1328-5

H.2 Multi-drop (8051 9 bit) Mode
Each serial channel of the DUART can be configured to
operate in a wake up mode useful for multi-drop or
multiprocessor applications. This section will first present
the concept of the Multi-Drop Mode. Afterwards, the
function and procedure of operating the DUART in the
Multi-Drop mode is discussed in Section H.2.1.
Rev. 2.11
Figure 45. A Flow Diagram depicting an Algorithm that could be used to Realize the
*RTSA is Automatically Negated by
Receiver Controlled RTS Function.
(OP0 toggles “High”)
ASSERT RTSA
(Write 01h to DUART Address 0Eh)
*CTSA INPUT IS ASSERTED.
Data transmission is now permitted.
-CTSA INPUT IS NEGATED.
Data transmission is disabled.
Yes
TXEMT
Asserted
TXRDY
Negated?
START
Is
?
Is
Transmitter-Controlled RTS/CTS Handshaking Mode
Yes
No
No
84
H.2.1 Concept of Multi-Drop Mode
This mode is compatible with the serial “Nine bit Mode” of
8051 family microcomputers. In this mode of operation a
“master station”, connected to a maximum of 256 slave
station is possible, as depicted in Figure 46.
TOGGLE OP3 (CTS_out) PIN
“LOW”
(Write 08h to DUART Address 0Eh)
Generate “Input Port Change of State”
Interrupt (IP2) in Receiving Device
TOGGLE OP3 (CTS_out) PIN
“HIGH”
(Write 08h to DUART Address 0Fh)
No
IP2 = 1
Is
?
Yes