MCF5272VF66 Freescale Semiconductor, MCF5272VF66 Datasheet - Page 264

• Manufacturer Part Number: MCF5272VF66
• Description: IC MPU 32BIT 66MHZ 196-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF527xr

Specifications of MCF5272VF66

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART, USB
• Peripherals: DMA, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (4K x 32)
• Program Memory Type: ROM
• Ram Size: 1K x 32
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 196-MAPBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -

Universal Serial Bus (USB)
12-6
set_configuration
Device Request
set_descriptor
set_interface
set_address
sync_frame
set_feature
get_status
Returns the current status of the specified device, endpoint or interface. No user notification is
provided, no user action required.
Loads the specified address into USBFAR. The control logic begins responding to the new address
once the status stage of the request completes successfully. No user notification is provided unless
debug mode is enabled.
Reads the configuration RAM. If the configuration is cleared, the USB module is placed into the
unconfigured state. If a valid configuration is selected, the appropriate endpoint controllers are
activated. An invalid configuration number or error in the configuration descriptor causes the USB
module to return a STALL response to the host. The user is notified when this request completes
successfully and must initialize the active endpoint controllers.
Not supported. Returns request error.
Sets the specified feature. Remote wakeup and endpoint halt are the only features defined in the USB
Specification, Revision 1.0. If the specified feature is remote wakeup, the USB enables the remote
wakeup functionality. If the specified feature is endpoint halt, the USB request processor halts the
selected endpoint. A halted endpoint returns a STALL response to any requests.
Allows the host to select an alternate setting for the specified interface. If a valid alternate setting is
selected, the appropriate endpoint controllers are activated. The user is notified upon successful
completion of this request and must reinitialize the affected endpoint controllers.
NOTE: The user must read the descriptor structure to determine which endpoints correspond to a
given interface.
Passed to the user as a vendor specific request.
MCF5272 ColdFire
Table 12-1. USB Device Requests (continued)
®
Integrated Microprocessor User’s Manual, Rev. 3
USB Request Processor Action
Freescale Semiconductor