MCF5307CFT66B Freescale Semiconductor, MCF5307CFT66B Datasheet - Page 129

• Manufacturer Part Number: MCF5307CFT66B
• Description: IC MPU 32BIT 66MHZ COLDF 208FQFP
• Manufacturer: Freescale Semiconductor
• Series: MCF530xr

Specifications of MCF5307CFT66B

• Core Processor: Coldfire V3
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: EBI/EMI, I²C, UART/USART
• Peripherals: DMA, POR, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-FQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Chapter 5
Debug Support
This chapter describes the Revision B enhanced hardware debug support in the MC5307.
This revision of the ColdFire debug architecture encompasses the earlier revision.
5.1 Overview
The debug module is shown in Figure 5-1.
Debug support is divided into three areas:
• Real-time trace support—The ability to determine the dynamic execution path
• Background debug mode (BDM)—Provides low-level debugging in the ColdFire
• Real-time debug support—BDM requires the processor to be halted, which many
through an application is fundamental for debugging. The ColdFire solution
implements an 8-bit parallel output bus that reports processor execution status and
data to an external emulator system. See Section 5.3, “Real-Time Trace Support.”
processor complex. In BDM, the processor complex is halted and a variety of
commands can be sent to the processor to access memory and registers. The external
emulator uses a three-pin, serial, full-duplex channel. See Section 5.5, “Background
Debug Mode (BDM),” and Section 5.4, “Programming Model.”
real-time embedded applications cannot do. Debug interrupts let real-time systems
execute a unique service routine that can quickly save the contents of key registers
and variables and return the system to normal operation. The emulator can access
saved data because the hardware supports concurrent operation of the processor and
BDM-initiated commands. See Section 5.6, “Real-Time Debug Support.”
Control
BKPT
Figure 5-1. Processor/Debug Module Interface
Freescale Semiconductor, Inc.
For More Information On This Product,
PST[3:0], DDATA[3:0]
ColdFire CPU Core
Debug Module
Trace Port
PSTCLK
Chapter 5. Debug Support
Go to: www.freescale.com
Communication Port
DSCLK, DSI, DSO
High-speed
local bus
5-1