HD6473308RCP10V Renesas Electronics America, HD6473308RCP10V Datasheet - Page 43

• Manufacturer Part Number: HD6473308RCP10V
• Description: MCU 5V 16K,PB-FREE 80-PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/330r

Specifications of HD6473308RCP10V

• Core Size: 8-Bit
• Program Memory Size: 16KB (16K x 8)
• Oscillator Type: Internal
• Core Processor: H8/300
• Speed: 10MHz
• Number Of I /o: 58
• Program Memory Type: OTP
• Ram Size: 512 x 8
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 80-PLCC
• No. Of I/o's: 58
• Ram Memory Size: 512Byte
• Cpu Speed: 10MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 2
• Digital Ic Case: RoHS Compliant
• Controller Family/series: H8/330
• Peripherals: ADC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Supply (vcc/vdd): -
• Eeprom Size: -
• Data Converters: -
• Peripherals: -
• Connectivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.2.2 Control Registers
The CPU control registers include a 16-bit program counter (PC) and an 8-bit condition code
register (CCR).
(1) Program Counter (PC): This 16-bit register indicates the address of the next instruction the
CPU will execute. Each instruction is accessed in 16 bits (1 word), so the least significant bit of the
PC is ignored (always regarded as 0).
(2) Condition Code Register (CCR): This 8-bit register contains internal status information,
including carry (C), overflow (V), zero (Z), negative (N), and half-carry (H) flags and the interrupt
mask bit (I).
Bit 7—Interrupt Mask Bit (I): When this bit is set to “1,” all interrupts except NMI are masked.
This bit is set to “1” automatically by a reset and at the start of interrupt handling.
Bit 6—User Bit (U): This bit can be written and read by software for its own purposes.
Bit 5—Half-Carry (H): This bit is set to “1” when the ADD.B, ADDX.B, SUB.B, SUBX.B,
NEG.B, or CMP.B instruction causes a carry or borrow out of bit 3, and is cleared to “0” otherwise.
Similarly, it is set to “1” when the ADD.W, SUB.W, or CMP.W instruction causes a carry or borrow
out of bit 11, and cleared to “0” otherwise. It is used implicitly in the DAA and DAS instructions.
Bit 4—User Bit (U): This bit can be written and read by software for its own purposes.
Bit 3—Negative (N): This bit indicates the most significant bit (sign bit) of the result of an
instruction.
(R7)
SP
Figure 3-2. Stack Pointer
27
Unused area
Stack area