D12312SVTEBL25 Renesas Electronics America, D12312SVTEBL25 Datasheet - Page 165

• Manufacturer Part Number: D12312SVTEBL25
• Description: IC H8S MCU ROMLESS 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12312SVTEBL25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412312SVTEBL25; HD6412312SVTEBL25

2.2.40
MOVFPE (MOVe From Peripheral with E clock)
Operation
(EAs)
Synchronized with E clock
Assembly-Language Format
MOVFPE @aa:16, Rd
Operand Size
Byte
Description
This instruction transfers memory contents specified by a 16-bit absolute address to a general
register Rd in synchronization with an E clock, tests the transferred data, and sets condition-code
flags according to the result.
Note: Avoid using this instruction in microcontrollers without an E clock output pin, or in
Available Registers
Rd: R0L to R7L, R0H to R7H
Operand Format and Number of States Required for Execution
Note: * For details, refer to the relevant microcontroller hardware manual.
Notes
1. This instruction cannot be used with addressing modes other than the above, and cannot
2. The number of states required for execution is variable. For details, refer to the relevant
Absolute address
Addressing
transfer word data or longword data.
microcontroller hardware manual.
Mode
single-chip mode.
MOVFPE
Rd
Mnemonic
MOVFPE
@aa:16, Rd
Operands
1st byte
6
A
Condition Code
H: Previous value remains unchanged.
N: Set to 1 if the transferred data is negative;
Z: Set to 1 if the transferred data is zero;
V: Always cleared to 0.
C: Previous value remains unchanged.
2nd byte
4
Instruction Format
otherwise cleared to 0.
otherwise cleared to 0.
Rev. 4.00 Feb 24, 2006 page 149 of 322
—
I
rd
UI H
—
Section 2 Instruction Descriptions
—
3rd byte
—
U
Move Data with E Clock
abs
N
4th byte
REJ09B0139-0400
Z
V
0
—
States
No. of
C
*