AT90PWM3B-16MU Atmel, AT90PWM3B-16MU Datasheet - Page 221

• Manufacturer Part Number: AT90PWM3B-16MU
• Description: IC MCU AVR RISC 8K FLASH 32-QFN
• Manufacturer: Atmel
• Series: AVR® 90PWM Lightingr

Specifications of AT90PWM3B-16MU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 27
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 11x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 32-QFN
• Package: 32QFN EP
• Device Core: AVR
• Family Name: 90P
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 27
• Interface Type: SPI/USART
• On-chip Adc: 11-chx10-bit
• Number Of Timers: 2
• Processor Series: AT90PWMx
• Core: AVR8
• Data Ram Size: 512 B
• Maximum Clock Frequency: 16 MHz
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRFBKIT, ATAVRISP2
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 10 bit, 1 Channel
• For Use With: ATSTK600-SOIC - STK600 SOCKET/ADAPTER FOR SOIC770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1005 - ISP 4PORT FOR ATMEL AVR MCU JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPIATAVRMC200 - KIT EVAL FOR AT90PWM3 ASYNCATAVRFBKIT - KIT DEMO BALLAST FOR AT90PWM2ATAVRISP2 - PROGRAMMER AVR IN SYSTEMATSTK520 - ADAPTER KIT FOR 90PWM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

19.6.2.3
4317J–AVR–08/10
UDR/EUDR data access from 13 to 17 bits per character
Figure 19-6. 9 bits communication data access
When the EUSART is used in 13, 14, 15, 16 or 17 bits per character mode, the EUDR/UDR reg-
isters are used in combinaison with the RxB8/TxB8 bit for data access.
For 13, 14, 15 or 16 bit character the upper unused bits in EUDR will be ignored by the Transmit-
ter and set to zero by the Receiver. In transmitter mode, the data should be written MSB first.
The data transmission starts when the UDR register is written.
In these modes, the RxB8/TxB8 registers are not used.
Figure 19-7. 13, 14, 15 and 16 bits communication data access
For 17 bit character the seventeenth bit is locate in RxB8 or TXB8 register. In transmitter mode,
the data should be written MSB first. The data transmission starts when the UDR register is
written.
Figure 19-8. 17 bits communication data access
RxB8 (receive)
or TxB8 (transmit)
Data 16:0
Data 15:0
16
15
15
EUDR
EUDR
EUDR
Data 8:0
AT90PWM2/3/2B/3B
8 7
8
8
7
7
UDR
UDR
UDR
0
0
0
221