DSPIC30F6012A-30I/PF Microchip Technology, DSPIC30F6012A-30I/PF Datasheet - Page 135

• Manufacturer Part Number: DSPIC30F6012A-30I/PF
• Description: IC DSPIC MCU/DSP 144K 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F6012A-30I/PF

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 144KB (48K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP, 64-VQFP
• Core Frequency: 40MHz
• Core Supply Voltage: 5.5V
• Embedded Interface Type: CAN, I2C, SPI, UART
• No. Of I/o's: 52
• Flash Memory Size: 144KB
• Supply Voltage Range: 2.5V To 5.5V
• Package: 64TQFP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 30 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 52
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 16-chx12-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT64PT4 - SOCKET TRAN ICE 64MQFP/TQFPAC164313 - MODULE SKT FOR PM3 64PFAC30F002 - MODULE SOCKET DSPIC30F 64TQFPDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

19.0
The 12-bit Analog-to-Digital Converter (ADC) allows
conversion of an analog input signal to a 12-bit digital
number. This module is based on a Successive
Approximation
provides a maximum sampling rate of 200 ksps. The
ADC module has up to 16 analog inputs which are
multiplexed into a sample and hold amplifier. The
output of the sample and hold is the input into the
connsverter which generates the result. The analog
reference voltage is software selectable to either the
device supply voltage (AV
on the (V
feature of being able to operate while the device is in
Sleep mode with RC oscillator selection.
FIGURE 19-1:
© 2008 Microchip Technology Inc.
Note:
AN10
AN12
AN13
AN14
AN15
AN11
12-BIT ANALOG-TO-DIGITAL
CONVERTER (ADC) MODULE
AN0
AN1
AN2
AN3
AN4
AN5
AN6
AN7
AN8
AN9
REF
This data sheet summarizes features of
this group of dsPIC30F devices and is not
intended to be a complete reference
source. For more information on the CPU,
peripherals, register descriptions and
general device functionality, refer to the
“dsPIC30F Family Reference Manual”
(DS70046).
V
V
+/V
REF
REF
Register
+
REF
-
-) pin. The ADC has a unique
12-BIT ADC FUNCTIONAL BLOCK DIAGRAM
dsPIC30F6011A/6012A/6013A/6014A
DD
(SAR)
/AV
SS
) or the voltage level
architecture
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
V
AN1
REF
AV
AV
DD
SS
-
and
S/H
Sample
CH0
The ADC module has six 16-bit registers:
• ADC Control Register 1 (ADCON1)
• ADC Control Register 2 (ADCON2)
• ADC Control Register 3 (ADCON3)
• ADC Input Select Register (ADCHS)
• ADC Port Configuration Register (ADPCFG)
• ADC Input Scan Selection Register (ADCSSL)
The ADCON1, ADCON2 and ADCON3 registers
control the operation of the ADC module. The ADCHS
register selects the input channels to be converted. The
ADPCFG register configures the port pins as analog
inputs or as digital I/O. The ADCSSL register selects
inputs for scanning.
The block diagram of the 12-bit ADC module is shown
in Figure 19-1.
Note:
Switches
12-bit SAR
The SSRC<2:0>, ASAM, SMPI<3:0>,
BUFM and ALTS bits, as well as the
ADCON3 and ADCSSL registers, must
not be written to while ADON = 1. This
would lead to indeterminate results.
DAC
Input
16-word, 12-bit
Sample/Sequence
Dual Port
RAM
Comparator
Conversion Logic
Control
Input MUX
Control
DS70143D-page 135