AT91M40800-33AU Atmel, AT91M40800-33AU Datasheet - Page 126

• Manufacturer Part Number: AT91M40800-33AU
• Description: IC ARM7 MCU 100 LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91M40800-33AU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, UART/USART
• Peripherals: POR, WDT
• Number Of I /o: 32
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Package: 100TQFP
• Device Core: ARM7TDMI
• Family Name: 91M
• Maximum Speed: 33 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 32
• Interface Type: EBI/USART
• Number Of Timers: 3
• Processor Series: AT91Mx
• Core: ARM7TDMI
• Data Ram Size: 8 KB
• Maximum Clock Frequency: 33 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• Eeprom Memory: 0 Bytes
• Input Output: 32
• Interface: EBI/EMI, UART/USART
• Ios: 32
• Memory Type: ROMless
• Number Of Bits: 32
• Package Type: 100-pin LQFP
• Programmable Memory: 0 Bytes
• Timers: 3-16-bit
• Voltage, Range: 1.8-3.6 V
• Cpu Family: 91M
• Device Core Size: 32b
• Frequency (max): 33MHz
• Program Memory Size: Not Required
• Total Internal Ram Size: 8KB
• # I/os (max): 32
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 2.5/3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 1.8V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Capture Operating Mode
Capture Registers A and B
(RA and RB)
Trigger Conditions
Status Register
126
AT91X40 Series
This mode is entered by clearing the WAVE parameter in TC_CMR (Channel Mode
Register). Capture Mode allows the TC Channel to perform measurements such as
pulse timing, frequency, period, duty cycle and phase on TIOA and TIOB signals which
are inputs.
Figure 46 shows the configuration of the TC Channel when programmed in Capture
Mode.
Registers A and B are used as capture registers. This means that they can be loaded
with the counter value when a programmable event occurs on the signal TIOA.
The parameter LDRA in TC_CMR defines the TIOA edge for the loading of register A,
and the parameter LDRB defines the TIOA edge for the loading of Register B.
RA is loaded only if it has not been loaded since the last trigger or if RB has been loaded
since the last loading of RA.
RB is loaded only if RA has been loaded since the last trigger or the last loading of RB.
Loading RA or RB before the read of the last value loaded sets the Overrun Error Flag
(LOVRS) in TC_SR (Status Register). In this case, the old value is overwritten.
In addition to the SYNC signal, the software trigger and the RC compare trigger, an
external trigger can be defined.
Bit ABETRG in TC_CMR selects input signal TIOA or TIOB as an external trigger.
Parameter ETRGEDG defines the edge (rising, falling or both) detected to generate an
external trigger. If ETRGEDG = 0 (none), the external trigger is disabled.
The following bits in the status register are significant in Capture Operating Mode.
•
•
•
•
•
•
Note:
CPCS: RC Compare Status
There has been an RC Compare match at least once since the last read of the
status
COVFS: Counter Overflow Status
The counter has attempted to count past $FFFF since the last read of the status
LOVRS: Load Overrun Status
RA or RB has been loaded at least twice without any read of the corresponding reg-
ister, since the last read of the status
LDRAS: Load RA Status
RA has been loaded at least once without any read, since the last read of the status
LDRBS: Load RB Status
RB has been loaded at least once without any read, since the last read of the status
ETRGS: External Trigger Status
An external trigger on TIOA or TIOB has been detected since the last read of the
status
All the status bits are set when the corresponding event occurs and they are automati-
cally cleared when the Status Register is read.
1354D–ATARM–08/02