AT91M40800-33AU Atmel, AT91M40800-33AU Datasheet - Page 12

• Manufacturer Part Number: AT91M40800-33AU
• Description: IC ARM7 MCU 100 LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91M40800-33AU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, UART/USART
• Peripherals: POR, WDT
• Number Of I /o: 32
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Package: 100TQFP
• Device Core: ARM7TDMI
• Family Name: 91M
• Maximum Speed: 33 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 32
• Interface Type: EBI/USART
• Number Of Timers: 3
• Processor Series: AT91Mx
• Core: ARM7TDMI
• Data Ram Size: 8 KB
• Maximum Clock Frequency: 33 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• Eeprom Memory: 0 Bytes
• Input Output: 32
• Interface: EBI/EMI, UART/USART
• Ios: 32
• Memory Type: ROMless
• Number Of Bits: 32
• Package Type: 100-pin LQFP
• Programmable Memory: 0 Bytes
• Timers: 3-16-bit
• Voltage, Range: 1.8-3.6 V
• Cpu Family: 91M
• Device Core Size: 32b
• Frequency (max): 33MHz
• Program Memory Size: Not Required
• Total Internal Ram Size: 8KB
• # I/os (max): 32
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 2.5/3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 1.8V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Peripheral Interrupt Control
Peripheral Data Controller
System Peripherals
PS: Power-saving
AIC: Advanced Interrupt
Controller
PIO: Parallel IO Controller
WD: Watchdog
12
AT91X40 Series
The Interrupt Control of each peripheral is controlled from the status register using the
interrupt mask. The status register bits are ANDed to their corresponding interrupt mask
bits and the result is then ORed to generate the Interrupt Source signal to the Advanced
Interrupt Controller.
The interrupt mask is read in the Interrupt Mask Register and is modified with the Inter-
rupt Enable Register and the Interrupt Disable Register. The enable/disable/status (or
mask) makes it possible to enable or disable peripheral interrupt sources with a non-
interruptible single instruction. This eliminates the need for interrupt masking at the AIC
or Core level in real-time and multi-tasking systems.
The AT91X40 Series Microcontroller has a 4-channel PDC dedicated to the two on-chip
USARTs. One PDC channel is dedicated to the receiver and one to the transmitter of
each USART.
The user interface of a PDC channel is integrated in the memory space of each USART.
It contains a 32-bit Address Pointer Register (RPR or TPR) and a 16-bit Transfer
Counter Register (RCR or TCR). When the programmed number of transfers are per-
formed, a status bit indicating the end of transfer is set in the USART Status Register
and an interrupt can be generated.
The Power-saving feature optimizes power consumption, enabling the software to stop
the ARM7TDMI clock (Idle Mode) and restarting it when the module receives an inter-
rupt (or reset). It also enables on-chip peripheral clocks to be enabled and disabled
individually, matching power consumption and application needs.
The AIC has an 8-level priority, individually maskable, vectored interrupt controller, and
drives the NIRQ and NFIQ pins of the ARM7TDMI from:
•
•
•
The AIC is extensively programmable, offering maximum flexibility, and its vectoring fea-
tures reduce the real-time overhead in handling interrupts.
The AIC also features a spurious vector, which reduces spurious interrupt handling to a
minimum, and a protect mode that facilitates the debug capabilities.
The AT91X40 Series has 32 programmable I/O lines. Six pins are dedicated as general-
purpose I/O pins. Other I/O lines are multiplexed with an external signal of a peripheral
to optimize the use of available package pins. The PIO controller enables generation of
an interrupt on input change and insertion of a simple input glitch filter on any of the PIO
pins.
The Watchdog is built around a 16-bit counter, and is used to prevent system lock-up if
the software becomes trapped in a deadlock. It can generate an internal reset or inter-
rupt, or assert an active level on the dedicated pin NWDOVF. All programming registers
are password-protected to prevent unintentional programming.
The external fast interrupt line (FIQ)
The three external interrupt request lines (IRQ0 - IRQ2)
The interrupt signals from the on-chip peripherals
1354D–ATARM–08/02