PM5366-PI PMC-Sierra, Inc., PM5366-PI Datasheet - Page 72

• Manufacturer Part Number: PM5366-PI
• Description: HIGH DENSITY 84/63 CHANNEL VT/TU MAPPER AND M13 MULTIPLEXER
• Manufacturer: PMC-Sierra, Inc.

PRELIMINARY
DATASHEET
PMC-2010672
PROPRIETARY AND CONFIDENTIAL
Notes on Pin Descriptions:
1. All TEMAP-84 inputs and bi-directionals present minimum capacitive loading
2. All TEMAP-84 outputs and bi-directionals have at least 2 mA drive capability.
3. Inputs CSB, RSTB, ALE, TMS, TDI and TRSTB have internal pull-up
4. Input A[12] has an internal pull-down resistor.
5. All unused inputs should be connected to GROUND.
6. Power to the VDD3.3 pins should be applied before power to the VDD1.8
and operate at TTL logic levels.
The bidirectional data bus outputs, D[7:0], have 4 mA drive capability. The
outputs TCLK[3:1], TPOS/TDAT[3:1], TNEG/TMFP[3:1],
RGAPCLK/RSCLK[3:1], RDATO[3:1], RFPO/RMFPO[3:1], ROVRHD[3:1],
TFPO/TMFPO/TGAPCLK[3:1], SBIACT, LAOE/LATPL, RECVCLK1,
RECVCLK2 and INTB have 4 mA drive capability. The SBI outputs and
telecom bus outputs, SDDATA[7:0], SDDP, SDPL, SDV5, SAJUST_REQ,
SAC1FP, LAV5, LAC1J1V1, LADATA[7:0], LADP and LAPL, have 8mA drive
capability. The bidirectional SBI signal SDC1FP has 8mA drive capability.
resistors.
pins is applied. Similarly, power to the VDD1.8 pins should be removed
before power to the VDD3.3 pins is removed.
ISSUE 1
60
HIGH DENSITY 84/63 CHANNEL VT/TU MAPPER
AND M13 MULTIPLEXER
PM5366 TEMAP-84