PM5366-PI PMC-Sierra, Inc., PM5366-PI Datasheet - Page 22

no-image

PM5366-PI

Manufacturer Part Number
PM5366-PI
Description
HIGH DENSITY 84/63 CHANNEL VT/TU MAPPER AND M13 MULTIPLEXER
Manufacturer
PMC-Sierra, Inc.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PM5366-PI
Manufacturer:
PMC
Quantity:
1 831
PRELIMINARY
DATASHEET
PMC-2010672
PROPRIETARY AND CONFIDENTIAL
• Frames to a DS2 (ANSI T1.107 section 8) signal with a maximum average
• Detects the DS2 alarm indication signal (AIS) in 9.9 ms in the presence of a 10 -3
• Extracts the DS2 X-bit remote alarm indication (RAI) bit and indicates far end
• Accumulates up to 255 DS2 M-bit or F-bit error events per second.
• Generates the required X, F, and M bits into the transmitted DS2 bit stream.
• Provides for transmission of far end receive failure (FERF) and alarm indication
• Provides optional automatic insertion of far end receive failure (FERF) on
• Multiplexes four DS1 or three 2048 kbit/s (according to ITU-T Rec. G.747) bit
• Performs required bit stuffing including generation and interpretation of C-bits.
• Includes required FIFO buffers for rate adaptation in the multiplex path.
• Performs required inversion of second and fourth multiplexed DS1 streams as
• Allows insertion and detection of per DS1 payload loopback requests encoded in
DS2 Framer Section:
reframe time of less than 7 ms (as required by TR-TSY-000009 Section 4.1.2
and TR-TSY-000191 Section 5.2).
bit error rate.
receive failure (FERF). The far end receive failure status only changes when the
associated bit has been in the same state for two consecutive frames. The
status is buffered for six M-frames, ensuring a better than 99.9% chance of
freezing the correct status for the duration of the out of frame occurrence.
DS2 Transmitter Section:
Allows inversion of inserted F or M bits for diagnostic purposes.
signal (AIS) under microprocessor control.
detection of out of frame (OOF), alarm indication signal (AIS) or red alarm
condition.
M12 Multiplexer Section:
streams into a single M12 format DS2 bit stream.
required by ANSI T1.107 Section 7.2.
the C-bits to be activated under microprocessor control.
ISSUE 1
10
HIGH DENSITY 84/63 CHANNEL VT/TU MAPPER
AND M13 MULTIPLEXER
PM5366 TEMAP-84

Related parts for PM5366-PI