STEVAL-PCC010V2 STMicroelectronics, STEVAL-PCC010V2 Datasheet - Page 90

• Manufacturer Part Number: STEVAL-PCC010V2
• Description: BOARD EVAL FOR ST802RT1A
• Manufacturer: STMicroelectronics
• Series: -r

Specifications of STEVAL-PCC010V2

• Design Resources: STEVAL-PCC010V2 BOM STEVAL-PCC010V2 Schematic
• Main Purpose: Interface, Ethernet Controller (PHY and MAC)
• Embedded: Yes, MCU, 32-Bit
• Utilized Ic / Part: ST802RT1A, STM32F207
• Primary Attributes: 1 Port, 100BASE-TX/10BASE-T
• Secondary Attributes: MII, RMII
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-11465

Electrical characteristics
Table 39.
5.3.15
90/163
Symbol
LU
Electrical sensitivities
I/O current injection characteristics
As a general rule, current injection to the I/O pins, due to external voltage below V
above V
operation. However, in order to give an indication of the robustness of the microcontroller in
cases when abnormal injection accidentally happens, susceptibility tests are performed on a
sample basis during device characterization.
Functional susceptibilty to I/O current injection
While a simple application is executed on the device, the device is stressed by injecting
current into the I/O pins programmed in floating input mode. While current is injected into the
I/O pin, one at a time, the device is checked for functional failures.
The failure is indicated by an out of range parameter: ADC error above a certain limit (>5
LSB TUE), out of spec current injection on adjacent pins or other functional failure (for
example reset, oscillator frequency deviation).
The test results are given in
Table 40.
Static latch-up class
Symbol
I
INJ
Parameter
DD
(for standard, 3 V-capable I/O pins) should be avoided during normal product
I/O current injection susceptibility
Injected current on all FT pins
Injected current on any other pin
T
Description
A
Table
= +105 °C conforming to JESD78A
Doc ID 15818 Rev 6
40.
Conditions
Functional susceptibility
Negative
injection
–5
–5
STM32F205xx, STM32F207xx
injection
Positive
+0
+5
II level A
Class
SS
Unit
mA
or