ISPNANO S3 KIT Equinox Technologies, ISPNANO S3 KIT Datasheet - Page 127

• Manufacturer Part Number: ISPNANO S3 KIT
• Description: ISP PORTABLE PROGRAMMER
• Manufacturer: Equinox Technologies
• Series: -r
• Type: Portable ISPr

Specifications of ISPNANO S3 KIT

• Contents: Programmer, Cables, Power Supply
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: ATMEL AT90S, AT90CAN, AT90USB, ATtiny, ATmega, AT91SAM7xx, Zensys Z-Wave, 24xxx Serial EEPROM's
• Other names: 483-1022; ISPNANO S3 KIT; Q5595084; T1310537

4.1 Overview
The programmer controls the +12V supply to the relay coils by enabling the electronic ‘EXT-VCC’
switch inside the programmer. This switch applies the voltage from the ‘EXT-VCC’ input (+12V) to the
relay coils. This causes the relays to switch so that the internal programmer I/O and power signals are
now connected to the Target System (UUT).
4.2 Controlling the RELAYs from EDS (Development Mode)
The simplest way to familiarise yourself with the operation of the RELAY switching is to make an
‘EDS (Development)’ project.
Instructions:
The functions of the different sections of this screen are outlined in the table below.
ISPnano Series Programmer - User Manual – V1.11 – 12
•
•
•
•
•
•
Launch EQTools
Select “Create a new EDS (Development Project)”
Select the programmer ‘ISPnano Series III’
Go through the EDS Wizard and select <Save> at the end of the wizard to save the project.
The EDS project will now launch.
Click on the <Target Power Supply> tab
displayed.
1
th
a screen similar to the screenshot below is
May 2011
2
3
111