ENC28J60-I/SS Microchip Technology, ENC28J60-I/SS Datasheet - Page 18

• Manufacturer Part Number: ENC28J60-I/SS
• Description: IC ETHERNET CTRLR W/SPI 28SSOP
• Manufacturer: Microchip Technology

Specifications of ENC28J60-I/SS

• Package / Case: 28-SSOP
• Controller Type: Ethernet Controller, MAC/10Base-T
• Interface: SPI
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Supply: 160mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Input Voltage Range (max): 2.25 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 3.3 V
• Supply Current (max): 180 mA
• Package: 28SSOP
• Standard Supported: IEEE 802.3
• Communication Mode: Full Duplex|Half Duplex
• Network Interface: MII|MIIM
• Data Rate: 10 Mbps
• Host Interface: SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ENC28J60
3.1.2
The ECON2 register, shown in Register 3-2, is used to
control other main functions of the ENC28J60.
REGISTER 3-2:
DS39662C-page 16
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2-0
Note 1:
AUTOINC
R/W-1
This bit is automatically cleared once it is set.
ECON2 REGISTER
AUTOINC: Automatic Buffer Pointer Increment Enable bit
1 = Automatically increment ERDPT or EWRPT on reading from or writing to EDATA
0 = Do not automatically change ERDPT and EWRPT after the buffer is accessed
PKTDEC: Packet Decrement bit
1 = Decrement the EPKTCNT register by one
0 = Leave EPKTCNT unchanged
PWRSV: Power Save Enable bit
1 = MAC, PHY and control logic are in Low-Power Sleep mode
0 = Normal operation
Reserved: Maintain as ‘0’
VRPS: Voltage Regulator Power Save Enable bit
When PWRSV = 1:
1 = Internal voltage regulator is in Low-Current mode
0 = Internal voltage regulator is in Normal Current mode
When PWRSV = 0:
The bit is ignored; the regulator always outputs as much current as the device requires.
Unimplemented: Read as ‘0’
PKTDEC
R/W-0
ECON2: ETHERNET CONTROL REGISTER 2
(1)
W = Writable bit
‘1’ = Bit is set
PWRSV
R/W-0
R/W-0
Preliminary
r
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
VRPS
U-0
—
© 2008 Microchip Technology Inc.
x = Bit is unknown
U-0
—
U-0
—
bit 0