ADSP-BF532SBST400 Analog Devices Inc, ADSP-BF532SBST400 Datasheet - Page 18

• Manufacturer Part Number: ADSP-BF532SBST400
• Description: IC DSP CTLR 16BIT 400MHZ 176LQFP
• Manufacturer: Analog Devices Inc
• Series: Blackfin®r
• Type: Fixed Pointr

Specifications of ADSP-BF532SBST400

• Rohs Status: RoHS non-compliant
• Interface: SPI, SSP, UART
• Clock Rate: 400MHz
• Non-volatile Memory: ROM (1 kB)
• On-chip Ram: 84kB
• Voltage - I/o: 1.8V, 2.5V, 3.3V
• Voltage - Core: 1.20V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 176-LQFP
• Device Core Size: 16b
• Architecture: Modified Harvard
• Format: Fixed Point
• Clock Freq (max): 400MHz
• Mips: 400
• Device Input Clock Speed: 400MHz
• Program Memory Size: Not RequiredKB
• Operating Supply Voltage (typ): 1.2/1.8/2.5/3.3V
• Operating Supply Voltage (min): 0.8/1.75V
• Operating Supply Voltage (max): 1.32/3.6V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 176
• Package Type: LQFP
• For Use With: ADZS-BF533-EZLITE - KIT W/BOARD EVAL FOR ADSP-BF533
• Lead Free Status / Rohs Status: Not Compliant

ADSP-BF531/BF532/BF533
32.
33.
34.
DESCRIPTION:
In this mode, if the PORT_CFG field in the PPI_CONTROL register is set to #b11 (Sync PPI_FS3 to PPI_FS2), the PPI_FS3 frame sync signal is
not driven to the PF3 flag pin. It is, however, correctly driven to PF3 when the PORT_CFG field is set to #b01 (Sync PPI_FS3 to PPI_FS1).
WORKAROUND:
None
APPLIES TO REVISION(S):
0.3, 0.4, 0.5
DESCRIPTION:
The DSPID register does not contain the correct silicon revision information.
WORKAROUND:
The upper 4 bits of the REVID register (at address 0xFFC0 0014) can be read to obtain silicon revision information. The remaining bits at
this location are reserved.
APPLIES TO REVISION(S):
0.4
DESCRIPTION:
If the DF bit is set prior to a hardware reset, the PLL will continue to divide CLKIN by 2 after the hardware reset, but the DF bit itself will be
cleared in the PLL_CTL register.
WORKAROUND:
Reprogram the PLL with DF cleared if the desire is to not divide CLKIN by 2 after reset.
APPLIES TO REVISION(S):
0.3, 0.4
05000233 - PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes:
05000234 - Incorrect Revision Number in DSPID Register:
05000242 - DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset:
NR003532D | Page 18 of 45 | July 2008
Silicon Anomaly List