2-1419130-4 TE Connectivity, 2-1419130-4 Datasheet - Page 357

• Manufacturer Part Number: 2-1419130-4
• Description: Electromechanical Relay SPDT 1A 12VDC 960Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Miniature Sealed Relayr

Specifications of 2-1419130-4

• Contact Arrangement: SPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.5 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 1 Form C
• Coil Resistance: 960Ohm
• Contact Current Rating: 1A
• Contact Material: Silver Nickel/Gold Plated
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Sealed
• Product Height (mm): 10mm
• Product Depth (mm): 7.5mm
• Product Length (mm): 12.5mm
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Lead Free Status / Rohs Status: Compliant

Dimensions are shown for
reference purposes only.
New Relay for
Flashing Lamp
Applications
Features
• 30A flashing lamp rating up to 85°C.
• Long life for flashing lamp load applications.
• 1 Form A and 1 Form C arrangements.
• Available as open frame or sealed relay.
• Choice of standard or high current model.
All parametric, environmental and life tests are performed accourding to EIA
Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH,
29.5 ± 1.0” Hg.) unless otherwise noted.
Min Recommended Current: 1 amp @ 12VDC.
Electrical Isolation
Dielectric Strength (coil to contacts): 500 Vrms.
Coil Data (@ 23°C Coil Temperature)
Conditions
Initial Voltage Drop: 100 millivolts, maximum, for normally open
Expected Life: Mechanical Life: 10 million operations.
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: PdCu/AgNi 0.15.
Max. Switching Rate: 20 operations per second with no contact load.
Max. Switching Voltage: 28VDC.
Max. Load Current (@ 14VDC Load Voltage):
Contact Data
Steady-State
Steady-State
Flashing
Designator
Alternate
Alternate
Flashing
Flashing
Flashing
Max. Make Current
Max. Make Current
Coil
Max. Break Current
Max. Break Current
H
F
(2)
(1)
Load
Load
Electrical Life: (See application information.)
Open Frame
Sealed Cover
Open Frame
Sealed Cover
Open Frame
Sealed Cover
Open Frame
Sealed Cover
contacts @ 10A contact load.
200 millivolts, maximum, for normally closed
contacts @ 10A contact load.
90 operations per minute for rated life at rated load.
270 operations per minute for passenger car lamp
outage indication.
Rated Coil
Voltage
(3)
(3)
(VDC)
Standard Current Types
High Current Types
12
24
Form A
Form A
120A
(NO)
240A
(NO)
15A
12A
20A
30A
25A
30A
-
-
-
-
±10% (Ohms)
Resistance
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Coil
362
90
120A
240A
15A
12A
20A
30A
25A
30A
NO
NO
4A
4A
8A
8A
Form C
Form C
Inductance
(H) (Ref.)
Coil
0.6
2.3
30A
10A
10A
10A
60A
20A
NC
5A
5A
4A
4A
NC
8A
8A
Catalog 1308242
Issued 3-03
Must-Operate
Specifications and availability
subject to change.
Mechancial Data
Termination: Printed circuit terminals. (U.S.A. footprint style only)
Enclosure: Sealed relay is suitable for immersion cleaning of PCB assembly
Weight: 20g (0.7 oz.) approximately.
Coil Data
Voltage: 12 and 24VDC.
Resistance: See Coil Data table.
Nom. Power: 1.6 watts @ 23°C coil temp. and rated coil voltage.
Thermal Resistance: 45°C per actual coil watt in stil air with no contact
Operate Data
Must Operate and Must Release Voltage: See Coil Data table.
Initial Operate Time:5 milliseconds, typical, with rated coil voltage applied.
Initial Release Time: 3 milliseconds, typical, with zero volts applied (for
Notes
(1) Continuous On-Off cycling of a single set of lamps at 60 to 90 cycles
(2) Continuous cycling between two sets of lamps with one set switched
(3) Inrush current for lamp load.
(4) Allowable overdrive is rated at ambient temperature for 23°C or 85°C
(5) Current and times are compatible with circuit protection by a typical
Environmental Data
Temperature Range: Storage:
Shock: 20g, 11 milliseconds, half sine wave pulse.
Vibration: (For NC contacts, NO contacts are significantly higher.)
VKP
PC Board Relay
Abnormal Operation
Overload Current: Consult factory.
24V Jump Start: 24VDC for 5 minutes conducting rated contact
Drop Test: Capable of meeting specifications after a 1.0 meter drop onto
Flammability: UL94-HB or better (meets FMVSS 302).
Voltage
(VDC)
13.9
per minute and approximately a 50% duty cycle.
by the N.O. contacts and the other by the N.C. contacts, at 60 to 90
cycles per minute and aproximately a 50% duty cycle.
as stated with no load current flowing through the relay contacts and
6.8
minimum coil resistance. Also see Figure 2 for maximum ambient
temperature versus applied coil voltage.
automotive circuit breaker. Relay will make, carry and break the
specified current.
or conformal coating. Relay may be vented cutting the vent
projection from the corner of the relay after processing using
razor knife or equivalent.
10-40 Hz., 1.27mm double amplitude.
40-70 Hz., 5g’s constant.
70-100 Hz., 0.5mm double amplitude.
100-500 Hz., 10g’s constant.
concrete in final enclosure.
series
current @ 23°C.
Must-Release
unsuppressed relays after having been energized at
rated coil voltage).
load current.
Voltage
Operating: -40°C to125°C
(VDC)
Open Types: -40°C to +155°C.
Sealed Types: -40°C to +125°C.
2.4
1.2
@ 23°C
19.6
39.3
TYCO ELECTRONICS
(4)
Allowable
.
Overdrive
(VDC)
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
(4)
@ 85°C
14.3
28.6
1009