2-1419130-4 TE Connectivity, 2-1419130-4 Datasheet - Page 119

• Manufacturer Part Number: 2-1419130-4
• Description: Electromechanical Relay SPDT 1A 12VDC 960Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Miniature Sealed Relayr

Specifications of 2-1419130-4

• Contact Arrangement: SPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.5 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 1 Form C
• Coil Resistance: 960Ohm
• Contact Current Rating: 1A
• Contact Material: Silver Nickel/Gold Plated
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Sealed
• Product Height (mm): 10mm
• Product Depth (mm): 7.5mm
• Product Length (mm): 12.5mm
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Lead Free Status / Rohs Status: Compliant

Dimensions are shown for
reference purposes only.
Features
• 1 Form A (SPST-NO) and 1 Form C (SPDT).
• 6 A rated current.
• Slim package : 5mm width.
• Sensitive coil 170mW.
• 4kV coil-to-contact insulation.
• Applications: PLCs, timers, temperature controllers, I/O modules.
Initial Dielectric Strength
Between Open Contacts: 1,000VAC, (1 minute).
Between Contacts and Coil: 4,000VAC, (1 minute).
Surge Voltage Between Coil and Contacts: 6,000V (1.2/50 s).
Creepage/Clearance Coil-to-Contact: Min. 6/8mm. Consult factory
regarding availability of 1 Form A model with 8/8mm.
Initial Insulation Resistance
Between Mutually Insulated Conductors: 100,000Mohm @ 500VDC.
Coil Data @ 20 C
Voltage: 5 to 48VDC.
Nominal Power: 170mW.
Contact Data @ 20 C
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: Silver tin oxide, silver tin oxide with gold plating; and
Max. Switching Rate: 12,000 ops./min. (no load).
Initial Contact Resistance:
Max. Switched Voltage: AC: 400V; DC: 300V.
Rated Voltage: AC: 250V; DC: 24V.
Max. Switched Current: 6A.
Max. Switched Power: 1,500VA. (See curve for DC Power).
Minimum Load: AgSnO or AgNi 90/10: >500mA, 12VAC/VDC.
Expected Mechanical Life: 10 million operations.
Expected Electrical Life: See curve.
* 15%
Operate Data @ 20 C
Must Operate Voltage: 70% of nominal voltage or less.
Must Release Voltage: 5% of nominal voltage or more.
Operate Time: 5 ms max. at nominal voltage.
Release Time: 2.5 ms max. at nominal voltage.
Bounce Time: 1.5 ms (N/O) typical at nominal voltage.
Rated Coil
Voltage
(VDC)
12
24
48
5
AgSnO or AgNi 90/10: 100 milliohms @ 1A, 12VDC.
AgSnO, Au plated: 50 milliohms @ 100mA, 6VDC.
silver nickel 90/10.
Nominal
Current
5 ms (N/C) typical at nominal voltage.
(mA)
34.0
14.2
AgSnO, Au plated: >10mA, 5VAC/VDC.
7.1
4.5
60 ops./min. (rated load).
(ohms)
Resistance
10,600*
Coil
3,390
119
848
V23092
10%
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Must Operate
Voltage
(VDC)
16.80
33.60
3.50
8.40
Must Release
Voltage
(VDC)
0.25
0.6
1.20
2.40
Catalog 1308242
Issued 3-03
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Environmental Data
Temperature Range:
Operating Humidity: 20 to 85% RH.
Mechanical Data
Termination: Printed circuit terminals.
Enclosure (94V-0 Flammability Ratings): Plastic sealed case (RT III
wash tight).
Weight: 0.2 oz. (6g) approximately.
Contact Life
Max. DC Load Breaking Capacity
Coil Operating Range
V23092 (SNR)
6 Amp Slim Miniature,
PC Board Relay
VDE
Operating: -40 C to +85 C.
Specifications and availability
subject to change.
File E48393
File 0631 / 0160 / 0435
series
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
SCHRACK
409