DS2152LN Maxim Integrated Products, DS2152LN Datasheet - Page 75

• Manufacturer Part Number: DS2152LN
• Description: Network Controller & Processor ICs
• Manufacturer: Maxim Integrated Products

Specifications of DS2152LN

• Product: Framer
• Number Of Transceivers: 1
• Data Rate: 2.048 Mbps
• Supply Voltage (max): 5.25 V
• Supply Voltage (min): 4.75 V
• Supply Current (max): 75 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Package / Case: LQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

15 LINE INTERFACE FUNCTION
The line interface function in the DS2152 contains three sections: the receiver, which handles clock and
data recovery; the transmitter, which waveshapes and drives the T1 line; and the jitter attenuator. Each of
these three sections is controlled by the Line Interface Control Register (LICR), which is described
below.
LICR: LINE INTERFACE CONTROL REGISTER (Address = 7C Hex)
(MSB)
SYMBOL
L2
JABDS
EGL
DJA
TPD
JAS
L2
L1
L0
L1
POSITION
LICR.7
LICR.6
LICR.5
LICR.4
LICR.3
LICR.2
LICR.1
LICR.0
L0
EGL
NAME AND DESCRIPTION
Line Build-Out Select Bit 2. Sets the transmitter build out; see
the
Line Build-Out Select Bit 1. Sets the transmitter build out; see
the
Line Build-Out Select Bit 0. Sets the transmitter build out; see
the
Receive Equalizer Gain Limit.
0 = -36dB
1 = -30dB
Jitter Attenuator Select.
0 = place the jitter attenuator on the receive side
1 = place the jitter attenuator on the transmit side
Jitter Attenuator Buffer Depth Select
0 = 128 bits
1 = 32 bits (use for delay sensitive applications)
Disable Jitter Attenuator.
0 = jitter attenuator enabled
1 = jitter attenuator disabled
Transmit Power Down.
0 = normal transmitter operation
1 = powers down the transmitter and tri-states the TTIP and
TRING pins
Table
Table
Table
15-2.
15-2.
15-2.
75 of 97
JAS
JABDS
DJA
(LSB)
TPD
LICR