DS2152LN Maxim Integrated Products, DS2152LN Datasheet - Page 21

• Manufacturer Part Number: DS2152LN
• Description: Network Controller & Processor ICs
• Manufacturer: Maxim Integrated Products

Specifications of DS2152LN

• Product: Framer
• Number Of Transceivers: 1
• Data Rate: 2.048 Mbps
• Supply Voltage (max): 5.25 V
• Supply Voltage (min): 4.75 V
• Supply Current (max): 75 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Package / Case: LQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

TCR1: TRANSMIT CONTROL REGISTER 1 (Address = 35 Hex)
Note: For a description of how the bits in TCR1 affect the transmit side formatter, see
LOTCMC
(MSB)
SYMBOL
LOTCMC
TFDLS
TYEL
TCPT
GB7S
TFPT
TSSE
TBL
TFPT
POSITION
TCR1.7
TCR1.6
TCR1.5
TCR1.4
TCR1.3
TCR1.2
TCR1.1
TCR1.0
TCPT
NAME AND DESCRIPTION
Loss Of Transmit Clock Mux Control. Determines whether
the transmit side formatter should switch to the ever present
RCLKO if the TCLK input should fail to transition
(see
0 = do not switch to RCLKO if TCLK stops
1 = switch to RCLKO if TCLK stops
Transmit F-Bit Pass Through. (See note below.)
0 = F bits sourced internally
1 = F bits sampled at TSER
Transmit CRC Pass Through. (See note below.)
0 = source CRC6 bits internally
1 = CRC6 bits sampled at TSER during F-bit time
Software Signaling Insertion Enable. (See note below.)
0 = no signaling is inserted in any channel from the TS1–TS12
registers
1 = signaling is inserted in all channels from the TS1–TS12
registers (the TTR registers can be used to block insertion on a
channel-by-channel basis)
Global Bit 7 Stuffing. (See note below.)
0 = allow the TTR registers to determine which channels
containing all 0s are to be Bit 7 stuffed
1 = force Bit 7 stuffing in all 0-byte channels regardless of how
the TTR registers are programmed
TFDL Register Select. (See note below.)
0 = source FDL or Fs bits from the internal TFDL register
(legacy FDL support mode)
1 = source FDL or Fs bits from the internal HDLC/BOC
controller or the TLINK pin
Transmit Blue Alarm. (See note below.)
0 = transmit data normally
1 = transmit an unframed all 1s code at TPOSO and TNEGO
Transmit Yellow Alarm. (See note below.)
0 = do not transmit yellow alarm
1 = transmit yellow alarm
TSSE
Figure 1-1
21 of 97
for details).
GB7S
Figure
TFDLS
16-11.
TBL
TYEL
(LSB)