R0E0200F0EMU00 Renesas Electronics America, R0E0200F0EMU00 Datasheet - Page 225

• Manufacturer Part Number: R0E0200F0EMU00
• Description: EMULATOR E200 MAIN BODY-SH7780
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In-Circuit Emulatorr

Specifications of R0E0200F0EMU00

• Contents: Emulator Board, Cables, Software and Documentation
• For Use With/related Products: SH7780
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.6.7
On the [BUS Event] sheet, the settings for BUS Eventpoints are displayed and modified.
Using six event detection channels sets six eventpoints.
Notes: 1. When the trace unit is not connected to the emulator, this function is not supported.
Items that can be displayed in the sheet are listed below.
[Type]
[State]
[Condition] A condition that satisfies an eventpoint. The displayed contents differ depending on
[Action]
2. When the debugging function of the trace unit is set again, the number of event
Setting BUS Eventpoints
detection channels is changed. For details, refer to section 5.1.4, [Bus Board] Page.
External bus event channel number and type
Whether the eventpoint is enabled or disabled
the channel.
Operation of the emulator when an eventpoint condition is satisfied. The displayed
contents differ depending on the channel.
Normal: Standard event channel
Delay: Event channel that delay conditions can be set
Reset: Event channel that can be set as the reset point of the external bus
sequential event
Enable: Valid
Disable: Invalid
Figure 5.42 [Event] Window ([BUS Event] Sheet)
199