R0E0200F0EMU00 Renesas Electronics America, R0E0200F0EMU00 Datasheet - Page 195

• Manufacturer Part Number: R0E0200F0EMU00
• Description: EMULATOR E200 MAIN BODY-SH7780
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In-Circuit Emulatorr

Specifications of R0E0200F0EMU00

• Contents: Emulator Board, Cables, Software and Documentation
• For Use With/related Products: SH7780
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

This function can be set in the [AUD Event] sheet of the [Event] window.
(3) BUS Eventpoint
This is a function that sets eventpoints according to the external bus of the MPU or information on
the pin such as an interrupt pin. There are six event detection channels.
For an operation when an event is detected, break or external bus trace acquisition/acquisition
start/acquisition stop can be specified.
A combination of one or more of the BUS evenpoints enables specifying more complex sequential
conditions.
This function can be set in the [BUS Event] sheet of the [Event] window.
Notes: 1. When the trace unit is not connected to the emulator, this function is not supported.
(4) Other Eventpoint
This function can be set in the [Other Event] sheet of the [Event] window.
(a) Execution time eventpoint
(b) External probe eventpoint
(c) Other eventpoints
Eventpoints can be defined specifying the program execution time as the condition. There is
one event detection channel.
For an operation when an event is detected, break can be specified.
Eventpoints can be defined specifying four external probe signals via the probe cable as the
condition. There is one event detection channel.
For an operation when an event is detected, break or AUD trace acquisition/acquisition
start/acquisition stop can be specified.
Event conditions can be set by some I/O analyzer functions.
2. When the function of the trace unit is changed, the function of event detection channels
is changed. For details, refer to section 5.1.4, [Bus Board] Page.
169