HS38000EPI61H Renesas Electronics America, HS38000EPI61H Datasheet - Page 228

• Manufacturer Part Number: HS38000EPI61H
• Description: DEV EMULATOR BASE UNIT H8/38000
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS38000EPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: 38000 Series
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

8.3.10
Selecting [View -> Code -> Trace] or clicking the [Trace] toolbar button displays the [Trace] window. Trace
information that can be acquired by the emulator and trace information items to be displayed are as listed below.
[PTR]
[Address]
[Instruction]
[Data]
[R/W]
[Area]
[Status]
[Probes]
[Timestamp]
[Source]
[Label]
[Timestamp-
Difference]
Trace Information
Cycle number in the trace buffer. When the most recent record is record 0, earlier
record numbers go backwards (-1, -2, ...). If a delay count has been set, the cycle
number where the trace stop condition has been satisfied is record 0. For the cycle
(during delay) executed until the trace has stopped, earlier record numbers go
forward (+1, +2, ...) the most recent record.
Address (6-digit hexadecimal)
Disassembled code of the executed instruction
Data bus value, displayed as 2-digit or 4-digit hexadecimal
Whether access was read (RD) or write (WR)
Memory area being accessed; internal ROM, internal RAM, I/O, or LCDRAM (not
available when a time stamp is acquired)
Bus status during this cycle; CPU (CPU data access cycle), CPU_PREFETCH
(prefetch), SUB_ACTIVE_DATA (sub-active data access cycle),
SUB_ACTIVE_PREFETCH (sub-active prefetch), CPU_MEDIUM_DATA (medium-
speed data access cycle), or CPU_MEDIUM_PREFETCH (medium-speed prefetch)
(not available when a time stamp is acquired)
A 4-bit binary number showing the four probe pins in the order of Probe 4, Probe 3,
Probe 2, and Probe 1 from the left (not available when a time stamp is acquired).
Time stamp of the record. Time stamps start from zero each time the user program
is executed. The timer resolution depends on the time stamp clock rate selected in
the trace acquisition (only available when a time stamp is acquired).
Source program
Label information for the address (if defined)
Difference from the timestamp value shown on the previous line (only available
when a time stamp is acquired)
207