HS38000EPI61H Renesas Electronics America, HS38000EPI61H Datasheet - Page 212

• Manufacturer Part Number: HS38000EPI61H
• Description: DEV EMULATOR BASE UNIT H8/38000
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS38000EPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: 38000 Series
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

[General] page (cont)
The MCUs selectable by the [Device] option and options that depend on the MCUs are listed below. To emulate
an MCU with a description in the Expansion Hardware column, connect the correct expansion hardware.
Table 8.2
[Device] Option
H8/3802
H8/3801
H8/3800
H8/38024
H8/38023
H8/38022
H8/38021
H8/38020
H8/38004
H8/38003
Note: Target/2 in [Clock] and Target in [SubClock] are only available when the target system is connected.
[Break on access error]
[User VCC Threshold]
[User Signals]
[Driver]
[Change driver in start up]
Environment for the H8/3800 E6000 Emulator CPU 300L Debugging Platform
[Clock] Option
0.5 MHz
2 MHz
8 MHz
Target/2
When this box is checked, a break (the user program stops) occurs if
your program accesses an access-prohibited area or writes to a write-
protected area.
Sets the voltage level for the user system. [Down] will be displayed in
[User System Voltage] of the [Extended Monitor] window when the actual
user VCC of the target system is lower than the specified value.
When this box is checked, the reset and NMI signals from the user
system are enabled.
Displays the E6000 driver that is currently installed.
When this box is checked, selection of a driver will be available next time
the emulator is connected.
[SubClock] Option
38.4 kHz
307.2 kHz
32.768 kHz
Target
Expansion Hardware
None
191