ADZS-HPUSB-ICE Analog Devices Inc, ADZS-HPUSB-ICE Datasheet - Page 26

• Manufacturer Part Number: ADZS-HPUSB-ICE
• Description: TOOL EMULATOR USB HP CROSSCORE
• Manufacturer: Analog Devices Inc
• Type: In-Circuit Emulator Systemr

Specifications of ADZS-HPUSB-ICE

• Contents: HPUSB-ICE, JTAG Pod, Power Supply and Cable
• Silicon Family Name: Blackfin
• Core Architecture: Blackfin
• Ic Product Type: Emulator
• Kit Contents: USB-based Emulator W/ 14-pin JTAG Connector, USB Cable
• Features: USB 2.0, Up To 1.5MB/sec
• Peak Reflow Compatible (260 C): Yes
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ADSP-219x Blackfin®, SHARC® and TigerSHARC® DSPs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: ADZU-HPUSB-ICE; ADZU-HPUSB-ICE

HPPCI JTAG I/O Voltage Detection
Legacy Mode (Factory Default Setting)
1-14
In order to modify the factory default setting, remove the four screws on
the bottom of the plastic enclosure. When opening the case, first remove
the top of the enclosure with the top facing up. This must be done to
ensure that the four light pipes used for the LEDs are not damaged. The
default pod setting is shown in
default setting of your HPPCI-ICE needs to be modified, refer to
Mode (Factory Default
Figure 1-6. HPPCI-ICE Pod
Legacy mode is used for older targets that do not support voltages less
than 3.3V and do not provide an IOVDD input for automatic voltage
detection by the pod. Consequently, the emulator in legacy mode is used
for all previously designed 3.3V and 5V target boards. The HPPCI-ICE is
3.3V compliant and 5.0V tolerant in this mode and accepts both 3.3V
and 5.0V signals but only drives 3.3V CMOS level signals. In legacy
mode, the LED labeled 3.3/5V is lit.
HPUSB, USB, HPPCI and MSP430 Emulators User’s Guide
Setting)”.
Figure
1-7. To determine whether the
“Legacy