ADZS-HPUSB-ICE Analog Devices Inc, ADZS-HPUSB-ICE Datasheet - Page 19

• Manufacturer Part Number: ADZS-HPUSB-ICE
• Description: TOOL EMULATOR USB HP CROSSCORE
• Manufacturer: Analog Devices Inc
• Type: In-Circuit Emulator Systemr

Specifications of ADZS-HPUSB-ICE

• Contents: HPUSB-ICE, JTAG Pod, Power Supply and Cable
• Silicon Family Name: Blackfin
• Core Architecture: Blackfin
• Ic Product Type: Emulator
• Kit Contents: USB-based Emulator W/ 14-pin JTAG Connector, USB Cable
• Features: USB 2.0, Up To 1.5MB/sec
• Peak Reflow Compatible (260 C): Yes
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ADSP-219x Blackfin®, SHARC® and TigerSHARC® DSPs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: ADZU-HPUSB-ICE; ADZU-HPUSB-ICE

MSP430 ICEs
HPUSB, USB, HPPCI and MSP430 Emulators User’s Guide
For custom processor boards still in design, refer to Engineer-to-Engineer
Note, Analog Devices JTAG Emulation Technical Reference (EE-68),
available from the Analog Devices Web site. This document is a technical
reference for implementing the JTAG interface on your target.
The emulator hardware is ready to be used in conjunction with
VisualDSP++ to debug a processor target system.
The final step is to connect the 14-pin header side of the pod cable to the
target board via the JTAG interface. The 14-pin connector is keyed at
pin 7 on the pod cable to ensure that the cable sits correctly on the 14-pin
target emulation header. The target board must also have pin 7 keyed.
Powering Up/Down an MSP430 Emulator
To power up the MSP430 emulator:
3. Power down the ICE.
4. Power down the target board.
1. Apply power to target board.
2. Apply power to ICE.
If the emulator has an “Enable/Power” LED, this should be green
when power is applied. It should be amber when connected to a
session or the ICE Test utility is being used.
If the emulator has an “Enable” LED only, this should be amber
when connected to a session or while the ICE Test utility is being
used.
At all other times, this LED should be off.
Getting Started
1-7