ADZS-HPUSB-ICE Analog Devices Inc, ADZS-HPUSB-ICE Datasheet - Page 18

• Manufacturer Part Number: ADZS-HPUSB-ICE
• Description: TOOL EMULATOR USB HP CROSSCORE
• Manufacturer: Analog Devices Inc
• Type: In-Circuit Emulator Systemr

Specifications of ADZS-HPUSB-ICE

• Contents: HPUSB-ICE, JTAG Pod, Power Supply and Cable
• Silicon Family Name: Blackfin
• Core Architecture: Blackfin
• Ic Product Type: Emulator
• Kit Contents: USB-based Emulator W/ 14-pin JTAG Connector, USB Cable
• Features: USB 2.0, Up To 1.5MB/sec
• Peak Reflow Compatible (260 C): Yes
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ADSP-219x Blackfin®, SHARC® and TigerSHARC® DSPs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: ADZU-HPUSB-ICE; ADZU-HPUSB-ICE

Attaching the Cable to the Emulation Target
Attaching the Cable to the Emulation
Target
HPUSB, HPPCI, USB JTAG ICEs (not MSP430)
1-6
The final step is to connect the 14-pin header side of the pod cable to the
target board via the debug interface. The 14-pin connector is keyed at
pin 3 on the pod cable to ensure that the cable sits correctly on the 14-pin
target emulation header. The target board should also have pin 3 keyed.
The following procedures apply only to USB-based emulators.
Powering Up/Down an HPUSB or USB Emulator
To power up the USB-based emulator:
To power down the USB-based emulator:
1. Apply power to target board.
2. Apply power to ICE.
3. Connect the USB cable between the ICE and the PC.
4. Invoke VisualDSP++.
1. Shut down (exit) VisualDSP++.
2. Disconnect the USB cable between the ICE and the PC.
Never connect or disconnect a USB emulator JTAG header,
whether powered up or not, to/from a powered target.
HPUSB, USB, HPPCI and MSP430 Emulators User’s Guide