R0E00008AKCE00 Renesas Electronics America, R0E00008AKCE00 Datasheet - Page 42

• Manufacturer Part Number: R0E00008AKCE00
• Description: EMULATOR E8A FOR H8 AND M16C
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of R0E00008AKCE00

• Contents: Emulator Board, Cables, Software and Documentation
• Core Architecture: R8C, M16C, H8
• Core Sub-architecture: R8C/Lx, M16C/60, M16C/30
• Kit Contents: E8A Emulator, USB-Interface Cable, User-Interface Cable, CD-ROM
• Features: On-Chip Debugging , Flash Memory Programming
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: 740, H8, H8S, M16C, R8C
• Lead Free Status / Rohs Status: Compliant

E8a Emulator User's Manual
3.6 Connecting the Emulator to the User System
Use the procedure below to connect the emulator to the user system with the user system interface
cable, or to disconnect them when moving the emulator or the user system.
1. Check that the host computer is turned off or the emulator is not connected to the host
2. Connect the user system interface cable to the user-side connector of the emulator.
3. Connect the USB cable to the host-computer-side connector of the emulator.
(1) The connector must be installed on the user system. Table 3.2 shows the recommended
Table 3.2 Recommended Connector
2514-6002
Note: When the connector is installed on the user system, do not install any components within 3
REJ10J1655-0400 Rev.4.00
Apr 30, 2010
computer with the USB cable.
connector for the emulator.
Type Number
mm of the connector.
3M Limited
Manufacturer
14-pin straight type
Specifications
3. Preparation before Use
Page 26 of 158