101-0533 Rabbit Semiconductor, 101-0533 Datasheet - Page 56

• Manufacturer Part Number: 101-0533
• Description: KIT DEV RABBIT3000/RCM3100
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-0533

• Rohs Status: RoHS non-compliant
• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM3100
• Interface Type: RS-232, Ethernet
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.15 V to 3.45 V
• For Use With/related Products: RCM3100
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1020

Table B-1 lists the electrical, mechanical, and environmental specifications for the Proto-
typing Board.
B.3 Power Supply
The RCM3100 requires a regulated 3.3 V ± 0.15 V DC power source to operate. Depend-
ing on the amount of current required by the application, different regulators can be used
to supply this voltage.
The AC adapter supplied with the RCM3100 Development Kit provides 12 V at up to 1 A
as the input to the voltage regulator on the Prototyping Board. The Prototyping Board has
an onboard +5 V switching power regulator from which a +3.3 V linear regulator draws
its supply. Thus both +5 V and +3.3 V are available on the Prototyping Board.
The Prototyping Board itself is protected against reverse polarity by a Shottky diode at D2
as shown in Figure B-3.
50
Board Size
Operating Temperature
Humidity
Input Voltage
Maximum Current Draw
(including user-added circuits)
Prototyping Area
Standoffs/Spacers
Table B-1. RCM30/31/32XX Prototyping Board Specifications
Parameter
Figure B-3. Prototyping Board Power Supply
5.30" × 6.775" × 1.00" (135 mm × 172 mm × 25 mm)
–20°C to +60°C
5% to 95%, noncondensing
8 V to 24 V DC
800 mA max. for +3.3 V supply,
1 A total +3.3 V and +5 V combined
2.0" × 3.5" (50 mm × 90 mm) throughhole, 0.1" spacing,
additional space for SMT components
5, accept 4-40 × 3/8 screws
Specification
RabbitCore RCM3100