101-0533 Rabbit Semiconductor, 101-0533 Datasheet - Page 32

• Manufacturer Part Number: 101-0533
• Description: KIT DEV RABBIT3000/RCM3100
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-0533

• Rohs Status: RoHS non-compliant
• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM3100
• Interface Type: RS-232, Ethernet
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.15 V to 3.45 V
• For Use With/related Products: RCM3100
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1020

A program “runs” in either mode, but can only be downloaded and debugged when the
RCM3100 is in the Program Mode.
Refer to the
gramming port and the programming cable.
4.3.2 Standalone Operation of the RCM3100
The RCM3100 must be programmed via the Prototyping Board or via a similar arrange-
ment on a customer-supplied board. Once the RCM3100 has been programmed success-
fully, remove the serial programming cable from the programming connector and reset the
RCM3100. The RCM3100 may be reset by cycling the power off/on or by pressing the
RESET
from the Prototyping Board for end-use installation.
26
CAUTION: Disconnect power to the Prototyping Board or other boards when removing
button on the Prototyping Board. The RCM3100 module may now be removed
or installing your RCM3100 module to protect against inadvertent shorts across the
pins or damage to the RCM3100 if the pins are not plugged in correctly. Do not reapply
power until you have verified that the RCM3100 module is plugged in correctly.
Rabbit 3000 Microprocessor User’s Manual
Figure 7. Switching Between Program Mode and Run Mode
for more information on the pro-
RabbitCore RCM3100