P0304 Terasic Technologies Inc, P0304 Datasheet - Page 35

• Manufacturer Part Number: P0304
• Description: DE2-70 CALL FOR ACADEMIC PRICING
• Manufacturer: Terasic Technologies Inc
• Type: FPGAr

Specifications of P0304

• Contents: DE2-70 Board, Power Supply, Cables, Plastic cover and software
• For Use With/related Products: Cyclone II 2C70
• For Use With: P0033 - BOARD ADAPTER HSMC TO GPIOP0006 - BOARD ADAPTER THDB-SUMP0001 - MODULE DIGITAL CAMERA 5MP (D5M)P0307 - KIT DEV 4.3" LCD TOUCH PANEL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DE2-70

Quartus II
Programmer
AS Mode
In addition to its use for JTAG and AS programming, the USB Blaster port on the DE2-70 board
can also be used to control some of the board's features remotely from a host computer. Details that
describe this method of using the USB Blaster port are given in Chapter 3.
5.2 Using the LEDs and Switches
The DE2-70 board provides four pushbutton switches. Each of these switches is debounced using a
Schmitt Trigger circuit, as indicated in Figure 5.3. The four outputs called KEY0, KEY1, KEY2, and
KEY3 of the Schmitt Trigger devices are connected directly to the Cyclone II FPGA. Each switch
provides a high logic level (3.3 volts) when it is not pressed, and provides a low logic level (0 volts)
when depressed. Since the pushbutton switches are debounced, they are appropriate for use as clock
or reset inputs in a circuit.
position and then reset the board by turning the power switch off and back on; this action
causes the new configuration data in the EPCS16 device to be loaded into the FPGA chip.
USB
USB Blaster Circuit
MAX
3128
Figure 5.2. The AS configuration scheme.
Figure 5.3. Switch debouncing.
PROG RUN
"PROG"
/
EPCS16
Serial
Configuration
Device
32
AS Mode
Config
Auto
Power-on Config
JTAG Config Port
DE2-70 User Manual