CT-161-CD Fujitsu Semiconductor America Inc, CT-161-CD Datasheet - Page 59

• Manufacturer Part Number: CT-161-CD
• Description: KIT 16LX FOR MB90F387
• Manufacturer: Fujitsu Semiconductor America Inc
• Series: F²MC-16LXr
• Type: MCUr

Specifications of CT-161-CD

• Contents: Board, Cable, CD
• For Use With/related Products: MB90F387S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 865-1103

(Continued)
*6 : Applicable to pins: P10 to P17, P20 to P27, P30 to P33, P35*, P36*, P37, P40 to P44, P50 to P57
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
Input/Output Equivalent circuits
Note that when the microcontroller drive current is low, such as in the power saving modes, the B input potential
Note that if a B signal is input when the microcontroller power supply is off (not fixed at 0 V) , the power supply is
microcontroller.
The value of the limiting resistance should be set so that when the B signal is applied the input current to the
microcontroller pin does not exceed rated values, either instantaneously or for prolonged periods.
may pass through the protective diode and increase the potential at the V
devices.
provided from the pins, so that incomplete operation may result.
resulting supply voltage may not be sufficient to operate the power-on reset.
pins, etc.) cannot accept B signal input.
Use within recommended operating conditions.
Use at DC voltage (current) .
The B signal should always be applied a limiting resistance placed between the B signal and the
Note that if the B input is applied during power-on, the power supply is provided from the pins and the
Care must be taken not to leave the B input pin open.
Note that analog system input/output pins other than the A/D input pins (LCD drive pins, comparator input
Sample recommended circuits:
*: P35 and P36 are MB90387S and MB90F387S only.
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
B input (0 V to 16 V)
resistance
Limiting
Protective diode
R
V
CC
MB90385 Series
P-ch
N-ch
CC
pin, and this may affect other
59