DK-DEV-3SL150N Altera, DK-DEV-3SL150N Datasheet - Page 18

• Manufacturer Part Number: DK-DEV-3SL150N
• Description: KIT DEVELOPMENT STRATIX III
• Manufacturer: Altera
• Series: Stratix® IIIr
• Type: FPGAr

Specifications of DK-DEV-3SL150N

• Contents: Development Platform, Cables and Software
• Silicon Manufacturer: Altera
• Core Architecture: FPGA
• Core Sub-architecture: Stratix
• Silicon Core Number: EP3S
• Silicon Family Name: Stratix III
• Kit Contents: Development Board, Cable And Accessories
• Rohs Compliant: Yes
• For Use With/related Products: EP3SL150F152
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 544-2568

4–4
Stratix III Development Kit User Guide
To configure the Stratix III FPGA, perform the following steps:
1. Verify that the 4-position SW1 mini-DIP switches and the two jumpers are set to
2. Connect the USB cable to the development board USB port.
3. Cycle the POWER switch OFF then ON.
4. Start the Quartus II software.
5. On the Tools menu, click Programmer. The Quartus II Programmer appears.
6. Click Add File and select <path>\examples\stratixIII_3sl150_dev_my_first_fpga
7. Turn on the Program/Configure option for the added file.
8. Click Start to download the selected file to the FPGA. The FPGA is configured
9. Confirm that user LEDs 0-3 flash in a slow binary counting pattern.
the default positions shown in
\stratixIII_3sl150_dev_my_first_fpga.sof.
when the progress bar reaches 100%.
Table
4–2.
Chapter 4: Development Board Setup
© August 2008 Altera Corporation
Configuring the FPGA