EVL6566B-65W STMicroelectronics, EVL6566B-65W Datasheet - Page 40

BOARD EVAL FOR L6566B

EVL6566B-65W

Manufacturer Part Number
EVL6566B-65W
Description
BOARD EVAL FOR L6566B
Manufacturer
STMicroelectronics
Datasheets

Specifications of EVL6566B-65W

Main Purpose
AC/DC, Primary Side
Outputs And Type
1, Isolated
Power - Output
65W
Voltage - Output
12V
Current - Output
5.4A
Voltage - Input
90 ~ 265VAC
Regulator Topology
Flyback
Frequency - Switching
80kHz
Board Type
Fully Populated
Utilized Ic / Part
L6566B
Product
Power Management Modules
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
497-6452

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
EVL6566B-65W
Manufacturer:
ST
0
Application information
5.13
Note:
40/51
Slope compensation
The pin MODE/SC (12), when not connected to VREF, provides a voltage ramp during
MOSFET’s ON-time synchronous to that of the internal oscillator sawtooth, with 0.8 mA
minimum current capability. This ramp is intended for implementing additive slope
compensation on current sense. This is needed to avoid the sub-harmonic oscillation that
arises in all peak-current-mode-controlled converters working at fixed frequency in
continuous conduction mode with a duty cycle close to or exceeding 50 %.
Figure 27. Slope compensation waveforms
The compensation will be realized by connecting a programming resistor between this pin
and the current sense input (pin 7, CS). The CS pin has to be connected to the sense
resistor with another resistor to make a summing node on the pin. Since no ramp is
delivered during MOSFET OFF-time (see
programming resistor is needed to ensure a clean operation at light loads.
The addition of the slope compensation ramp will reduce the available dynamics of the
current signal; thereby, the value of the sense resistor must be determined taking this into
account. Note also that the burst-mode threshold (in terms of power) will be slightly
changed.
If slope compensation is not required with FF operation, the pin shall be left floating.
MODE/SC
oscillator
(pin 12)
Internal
(pin 4)
GD
Figure 27
), no external component other than the
t
t
t
L6566B

Related parts for EVL6566B-65W