MCP212XEV-DB Microchip Technology, MCP212XEV-DB Datasheet - Page 45

• Manufacturer Part Number: MCP212XEV-DB
• Description: BOARD DEMO FOR MCP212X
• Manufacturer: Microchip Technology

Specifications of MCP212XEV-DB

• Main Purpose: Interface, Infrared Transceiver
• Utilized Ic / Part: MCP2120, MCP2122
• Processor To Be Evaluated: MCP2122 and MCP2120
• Interface Type: UART
• Silicon Manufacturer: Microchip
• Silicon Core Number: MCP2120, MCP2122
• Kit Contents: MCP2122 Daughter Board, Docs
• Features: 8-Pin And 14-Pin Sockets, Three Optical Transceiver Circuits
• Mcu Supported Families: MCP212x
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Embedded: -
• Primary Attributes: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

F.1
© 2006 Microchip Technology Inc.
Appendix F. Configuring the HyperTerminal
CONFIGURING THE HyperTerminal
To ensure that the PC is able to communicate to the PICDEM™ HPC Explorer Demo
Board, the HyperTerminal program must be properly configured. This section describes
the configuration that the HyperTerminal program should be in.
The screen-shots shown in Figure F-1 through Figure F-6 show the settings of the
HyperTerminal program in the Windows
You should save each configuration of the HyperTerminal program in order to easily
distinguish which HyperTerminal program window is “tacking” with which PICDEM™
HPC Explorer Board.
After opening the HyperTerminal program window, select Call -> Disconnect. In the
lower-left corner, the HyperTerminal program window will indicate “Disconnected”.
Next, in the HyperTerminal program window, select File -> Properties. The window in
Figure F-2 is shown. Ensure that the appropriate COM port is selected for both the
“Golden” unit and the “Testing” unit. Then select the Configure button.
FIGURE F-1:
DAUGHTER BOARD USER’S GUIDE
HyperTerminal
®
PROGRAM
®
MCP212X DEVELOPER’S
PROGRAM MAIN WINDOW
®
operating system.
®
Program
DS51571B-page 41