MIKROE-957 mikroElektronika, MIKROE-957 Datasheet - Page 45

• Manufacturer Part Number: MIKROE-957
• Description: Other Development Tools ASLK PRO ANALOG DEVELOPMENT SYSTEM
• Manufacturer: mikroElektronika

Specifications of MIKROE-957

• Rohs: yes
• Product: Analog System Lab Kit PRO
• Tool Is For Evaluation Of: TL082, MPY634
• Operating Supply Voltage: 2.5 V to 5.5 V
• Description/function: Analog Lab Kit for Undergraduate Engineering
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C

7.3 Measurements to be taken
7.4 What you should submit
1
2
1
2
3
4
Analog System Lab Kit PRO
Measure the lock range of the system and measure the change in the phase of
the output signal as input frequency is varied within the lock range.
Vary the input frequency and obtain the change in the control voltage and plot
the output. A sample output characteristic of the PLL is shown in Figure 7.2.
Simulate the circuits and obtain the characteristics of the system.
Take the plots of characteristics from oscilloscope and compare it with
simulation results.
Measure the change in the phase of the output signal as input frequency is
varied within the lock range.
Vary the input frequency and obtain the change in the control voltage. Use
Table 7.2 to record your readings.
S.No.
S.No.
1
2
3
4
1
2
3
4
Table 7.2: Control Voltage as a function of Input Frequency
Table 7.1: Output Phase as a function of Input Frequency
Input Frequency
Input Frequency
Control Voltage
Output Phase
7.5 Exercise Set 7
Design a Frequency Synthesizer to generate a waveform of 1MHz frequency from a
100kHz crystal as shown in Figure 7.3.
Notes on Experiment 7:
Figure 7.3: Block Diagram of Frequency Optimizer
page 45