iMX233-OLINUXINO-MICRO Olimex Ltd., iMX233-OLINUXINO-MICRO Datasheet - Page 36

• Manufacturer Part Number: iMX233-OLINUXINO-MICRO
• Description: Development Boards & Kits - ARM OLINUXINO i.MX233 MICRO LINUX SBC
• Manufacturer: Olimex Ltd.

Specifications of iMX233-OLINUXINO-MICRO

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: MCIMX233CAG4C
• Core: ARM926EJ-S
• Interface Type: Ethernet, USB
• Operating Supply Voltage: 5 V
• Description/function: Single Board Linux Computer i.MX233 ARM926J at 454 MHz with UB host, TV-out (PAL / NTSC), 2x30 GPIOs, SD
• Dimensions: 76.2 mm x 43.2 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 25 C
• Tradename: OLinuXino

OLIMEX© 2012
OLinuXino-MICRO user's manual
Power button – when Linux is running pressing PWR_BUT will put the board in low power mode;
when powered by battery PWR_BUT is used to initially power up the board – and pressing the
board again after it is powered will put it low power mode
Recovery button (REC) – when the board is put to sleep REC can be used to “wake-up” the board
512 (32M x 16) MBit DDR SDRAM - the exact memory used at the moment of writing is Xylinx
HY5DUxxxyyy
LED1
6.12 Accessories
Here you will find additional information for Olimex products you can use with OlinuXino-MICRO
6.12.1 USB-SERIAL-CABLE-F
The cable for the U_DEBUG interface that can be purchased for additional cost has three cables. It
is important to specify in your purchase order whether you want the USB-SERIAL-CABLE-F
variant with male of female connectors. The wires follow the following color pattern GND=BLUE,
RX(INPUT)=GREEN, TX(OUTPUT)=RED.
You will need a drivers that can be downloaded from the page of USB-SERIAL-CABLE:
https://www.olimex.com/Products/Components/Cables/USB-Serial-Cable/USB-Serial-Cable-F/.
Page 36 of 47