iMX233-OLINUXINO-MICRO Olimex Ltd., iMX233-OLINUXINO-MICRO Datasheet - Page 10

• Manufacturer Part Number: iMX233-OLINUXINO-MICRO
• Description: Development Boards & Kits - ARM OLINUXINO i.MX233 MICRO LINUX SBC
• Manufacturer: Olimex Ltd.

Specifications of iMX233-OLINUXINO-MICRO

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: MCIMX233CAG4C
• Core: ARM926EJ-S
• Interface Type: Ethernet, USB
• Operating Supply Voltage: 5 V
• Description/function: Single Board Linux Computer i.MX233 ARM926J at 454 MHz with UB host, TV-out (PAL / NTSC), 2x30 GPIOs, SD
• Dimensions: 76.2 mm x 43.2 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 25 C
• Tradename: OLinuXino

OLIMEX© 2012
OLinuXino-MICRO user's manual
fuses of the processor:
SD_MBR_BOOT(3) - Blown
SD_POWER_GATE_GPIO(21:20) – 10-PWM3
For burning the fuse position we use the BitBurner software. This operation is discussed in details
before. Proceed with great caution when burning fuses since it is irreversible operation.
The first batches of the board and the SD-card used the Debian Linux image. After that we switched
over to ArchLinux for the ease of the package manager. Instructions how to build the ArchLinux
can be found at the gitHub address of OLinuXino.
2.6 Using BitBurner
IMPORTANT! MODIFYING THE FUSES IS IRREVERSIBLE PROCESS! BURNING THE
WRONG FUSES MIGHT DAMAGE OLINUXINO IRREVERSIBLY! BURNING WRONG
FUSES MIGHT CAUSE BOOT PROBLEMS!
BURN FUSES AT OWN RISK!
The bit burning is done via the USB of the computer connected to the OLINUXINO board and the
BitBurner software. To be able to burn the fuses you will need to connect a USB-A to USB-A cable
between a computer and the board's USB-HOST connector.
Download BitBurner from
https://www.olimex.com/dev/OLINUXINO/iMX233-
OLINUXINO/BitBurner.v1.0.4.6.zip. Extract it and start the .exe. If you connect everything you
should see and choose HID-compilant device from the “Select device” drop-down menu.
Page 10 of 47