CX28344 Conexant, CX28344 Datasheet - Page 100
![no-image](/images/no-image-200.jpg)
CX28344
Manufacturer Part Number
CX28344
Description
(CX2834x) Dual / Triple / Quad / Hex / Octal - Enhanced DS3 / E3 Framer
Manufacturer
Conexant
Datasheet
1.CX28344.pdf
(195 pages)
- Current page: 100 of 195
- Download datasheet (2Mb)
Functional Description
2-54
Although there is a bit in the Status Indication register (Receive Data Link Status
register), which can be queried to inform the system if the next byte to be read from
the FIFO buffer is a status or a data byte (StatByte field), the bit in the Status
Indication register is not strictly needed for reading from the FIFO buffer. The first
byte read from the FIFO buffer after the RDL is enabled is a status byte, which
indicates the number of data bytes following it, 0 for (b) blocks, additional
information field for (a1) and (a2) blocks. After this, another status byte is again
guaranteed, and so forth. The next FIFO byte type bit is supplied only for systems that
do not want to maintain a count of data bytes after reading each status byte, and would
rather query this bit before reading every single byte in the FIFO buffer.
Interrupt-Driven Mode
The interrupt-driven FIFO buffer reading mode is enabled by unmasking at least one
of the two functional interrupts related to the RDL (FIFO near-full and message
received). The third interrupt (FIFO overrun) is useful for error condition monitoring.
Once an interrupt occurs, the microprocessor reads the SrcChnl1 to SrcChnl4 fields of
the Source Channel Status register to identify which channel is the interrupt’s
originator. It then reads that channel’s Interrupt Source Status register to identify
which part of the chip raised the interrupt (RDL in this case, namely RxDLItr field). It
then reads the interrupt identification fields of the Status Indication register for this
channel’s RDL (the RxNF, RxMsg, and RxOVR fields of the Receive Data Link
Status register) to identify the type of interrupt.
Before reading a status byte from the FIFO buffer, the RDL Status Indication register
(Receive Data Link Status register) is read; the first time after an interrupt to identify
the interrupt’s source, every other time to make sure there are data blocks in the FIFO
buffer still left to read.
Beyond this, options of handling the interrupt are numerous, but one would expect the
microprocessor to read one or more data blocks and/or one or more bytes from the
FIFO buffer. What follows is a possible routine:
!
!
Polling Mode
Polling mode is effective when both the RDL functional interrupts have been masked.
Polling mode differs from interrupt-driven mode only in that the entry into the service
routine is timer-dependent rather than interrupt-driven. The rest of the handling is
much the same as it is under interrupt-driven mode.
NOTE:
The E3-G.832 framer in question has all its RDL interrupts set to active, with the
near-full threshold set to 32 bytes.
After identifying the source and type of interrupt, if the interrupt type is
" Message received: If the microprocessor is busy, do nothing but return; if it is
" FIFO near-full: Read one entire block from the FIFO buffer, check if the data
" FIFO overrun: Inform the network management that the system was unable to
not busy, read one entire block from the FIFO buffer, then check if the “data
block in FIFO” indication is set; if not return, otherwise repeat
block in FIFO indication is set; if not return, otherwise repeat
cope with the data link throughput, then act as per FIFO near-full
Mindspeed Technologies™
In this example, from the time a FIFO near-full. interrupt occurs until the FIFO buffer
fills up, a minimum period of 12 ms (96 bytes at 8 KB) passes.
CX28342/3/4/6/8 Data Sheet
28348-DSH-001-B
Related parts for CX28344
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![PH2402](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Bluetooth RF Transceiver
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![PH2401](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Bluetooth RF Transceiver
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![BT8222EPFE](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
ATM transmitter/receiver with UTOPIA interface
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CN8330EPJD](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Service SAR controller
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CN8223EPF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
CN8223EPFATM Transmitter/Receiver with UTOPIA Interface
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![RC224ATL](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Embedded modem family
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![BT8370KPF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Fully integrated T1/E1 framer and line interface
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![BT869KRF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Flicker-free video encoder
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CX82100-41](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Home Networking Physical Layer Device with Integrated Analog Front End Circuitry Data Sheet (Preliminary) CX82100-41Home Network Processor (HNP)
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![R6781-13](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![BT864AKRF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CX20493-31](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![BT868KRF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Flicker-free video encoder
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CX81801-84](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
SmartV.XX Modem
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CN8478EPF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Multichannel synchronous communications controller
Manufacturer:
Conexant Systems, Inc.
Datasheet: